Question about 2000 Toyota ECHO

1 Answer

2002 toyota echo replacing rear brake shoes now drums won't fit

I replaced the rear brake shoes on my 2002 toyota echo now the drum won't go back on why? the old shoes and new shoes are the same size

Posted by Anonymous on

Ad

1 Answer

sempron

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Toyota Expert
  • 276 Answers

I had a similiar problem with mine the hand brake was stuck on and wouldn't let the new drums go back on.

Posted on Aug 26, 2018

Ad

1 Related Answer

Toyota Ed

  • 1861 Answers

SOURCE: Can't get my brake drums back on my '92 Ford F150.

You need to rotate the starwheel brake adjuster inward, to let the shoes come together. Then, you can slide the drum back on. You will need to readjust the starwheel again, after the drum is on, to obtain the proper position for the new brakes.

Posted on Feb 25, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 rear brakes make a noise when backing


Noise after replacing rear brake shoes and drums...help! - Toyota ...

www.toyotanation.com/.../328271-noise-after-replacing-rear-brake-shoe...
Jan 19, 2010 - 15 posts - ‎9 authors Check to make sure the new drums dont have a longer/thicker drum face that is scraping the back plate. ... 1998 Mazda 626 FS-DE/CD4-E .... I experienced rear shoebrake clicking/clacking with an older Saturn. ... plate and to be banged back against the plate causing the clicking or clacking noise. screeching noise from rotors + brakepads after ...
15 posts
Nov 20, 2009
'95 Right Rear Brakes makin' a "clicking" noise when ...
15 posts
Jan 6, 2008
Rear Brake Noise
15 posts
Oct 30, 2005
More results from www.toyotanation.com

Nov 08, 2015 | 1998 Toyota Camry

1 Answer

Brake shoes from old rear axle not fitting on to the new rear axle 2002 durango


you have compress the caliper piston to get brake shoes back on.

Feb 05, 2013 | 2002 Dodge Durango

1 Answer

Can't drums back on a toyota echo 2004


Notice the question ,duh putting drum back ON.Yes I have encounterd this 3times. Make sure e brake is backed off and the adjuster is tripped and shoes are retracted, also if aftermarket shoes had to grind a little off bottom of each shoe where it rests on each side, Next time I used Toyota shoes and new drum. No problem. Seems thatlining is thicker on aftermarket shoes from napa.

Apr 16, 2012 | 2004 Toyota ECHO

1 Answer

Replace rear hub bearing toyota echo 2003


take off tire and brake drum you do not have to take off brake shoes remove the four bolts on the back of housing and tap the unit out good luck

Mar 25, 2012 | Toyota ECHO Cars & Trucks

1 Answer

Brake shoes on 1987 f250 460 1987 2 wheel drive how to replace


Lift the front of your Ford F-250 off of the ground using a jack and jack stands. Remove the wheels from the Ford with a lug nut wrench to prepare the truck for servicing. 2 Open the hood on the engine compartment and take the lid off of the master cylinder that bolts to the brake assister on the driver's side firewall.3 Remove the hex-head bolts on the back of the brake caliper with a socket. With the bolts removed, pull the caliper off of the Ford's brake rotor.4 Pull the old brake pads out of the caliper and discard them. Squeeze the brake piston back into the backside brake caliper with pliers, and then insert the new pads into the brake caliper.5 Pull the rotor cap cover off the middle of the rotor with a screwdriver and use a socket to remove the nut located behind the cover.6 Pull the rotor off of the wheel spindle.7 Remove the old wheel bearings from the brake rotor and insert them into the new rotor. If the old wheel bearings are worn, replace them with new bearings.8 Slide the new rotor onto the wheel spindle and secure it using a bolt and socket. After you tighten the bolt, press the cover back onto the rotor.9 Place the caliper on the rotor and secure it with a socket and hex-head bolts. 10 Duplicate the process on the passenger side of the F-250. 11 Close the master cylinder after putting the wheels back on the Ford and lowering it to the ground. Press on the brake pedal to seat the pads against the rotor
Replace the F-250's Rear Brakes 1 lift the rear of the Ford F-250 off the ground with a jack and jack stands. Remove the wheels from the Ford with a lug nut wrench.2 Place a strip of paint on the back of the brake drum and rear brake drum cover so you can position the brake drum orrectly when you put it back on. If you plan to install new brake drums on your Ford F-250, skip this step. 3 Place the brake drum puller on the brake drum and pull the drum from the wheel hub. The method for attaching the brake drum puller depends on the brake drum puller that you use. 4 Remove the springs that attach the brake shoes to the wheel hub by pulling them off with pliers.5 Lift the old brake shoes off of the wheel hub and place the new brake shoes on the wheel hub. Secure the new shoes with the springs.6 Pound the brake drum onto the axle hub with a rubber mallet.7 Duplicate the process on the passenger side of the Ford.8 Put the wheels back on the F-250, lower it to the ground and, then press on the brake pedal to seat the shoes against the brake drum.

Oct 14, 2011 | 1988 Ford F 250

1 Answer

I have a 1996 Chevrolet Cavalier Coupe 2.2L 4 Cylinder. I will be replacing my rear axle beam relatively soon, and was wondering what size drums and brake shoes i will be needing? I don't know if it...


First of all, you have no rear axle. Are you talking about the subframe or your hubs? As for drum size, I would go with the same size that are coming off. If you want to (and can) go bigger, you just need to make sure they have enough clearance inside your wheels. When ordering parts, you will be asking for: wheel cylinders, shoes, spring kit and drums. Note: the wheel cylinders you will only need to change if you are changing the SIZE of your drums or IF THEY LEAK. To see if they are good, pull your drums, smack your shoes from one side then to the other (using the palms of your hands) then back to center. Pull back the rubber boots and inspect for moisture. If they're dry, don't change the cylinders. If they're wet, they're leaking and need to be replaced. Now, if you do need to replace your wheel cylinder(s), you need to look in behind and assess the condition of the brake line fitting. If it looks rotten beyond all hell, you'll likely be into doing the brake line(s) as well. NOTE: when you actually do get into changin your brakes, do ONE SIDE AT A TIME. Drum brakes can be complex and if you take apart both sides then you have no reference as to how to put them back together!

Sep 06, 2011 | 1996 Chevrolet Cavalier

1 Answer

Ok, my 2002 Dodge Neon is having brake problems we replaced the rear master cylinders and brake bad. But, the rear right drums catches the brakes when you free spin the drum with your hand at one point. We...


You need to manually adjust the brakes after putting new brake shoes on. The automatic adjuster has adjusted for wear in the old shoes which will make the new shoes too tight.

Dec 18, 2010 | 2002 Dodge Neon

1 Answer

Cant fit drums over pads


You need to retract the brake shoes, via the center adjuster mechanism. As your old brake wore, the adjuster moved the shoes outward. Simply move the adjuster to retract the shoes, then slide the drum on. Then, readjust the rear shoes.

Mar 15, 2009 | 2003 Toyota ECHO

1 Answer

Can't get my brake drums back on my '92 Ford F150.


You need to rotate the starwheel brake adjuster inward, to let the shoes come together. Then, you can slide the drum back on. You will need to readjust the starwheel again, after the drum is on, to obtain the proper position for the new brakes.

Feb 25, 2009 | 2002 Toyota ECHO

Not finding what you are looking for?
2000 Toyota ECHO Logo

Related Topics:

530 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...