At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Powertrain Control Module (PCM) doesn't receive a wheel distance message from the Anti-lock brake Module or FCM (NON-ABS) over the CAN C bus. One trip fault.
U1120 means the abs module has lost communication with speed sensors. You'll need a scanner to monitor speed sensors. If problem is in module you won't get communication with scanner. Follow your brake lines from master cylinder to ABS pump/module, on the side of in is a wired connector. Undo it and check for moisture or corrosion. Get some dielectric gel and smear it good on all contacts. And plug back in and retest. Might need new module or speed sensor
P0300 is a Random Misfire P0302 #2 Cylinder Misfire U1120 The code U1120 means, lost wheel distance message. The powertrain control module(PCM) is not
receiving a signal from the anti-lock brake module. The problem could be a short in the bus circuit,
the PCM or the anti-lock brake module. This type of problem is best diagnosed by the dealer or a
local shop with the proper diagnostic scanning equipment. Hope this helps.
My 07 dodge charger brake light,abs, esp, bas light on an check engine light on an the hand show u how fast u going don’t work I took it to auto zone an they run a check on it an the code showed up u1120 an u1121i replace the rear brake sensors an drove it around the corner but the lights are still on.
U1120 means the PCM doesn't receive a vehicle speed signal from the Anti-lock brake Module over the CAN C bus. This can be caused by the ABS module, PCM or something wrong with the can bus. This might be just an erroneous code and may never set again
×