Hi there:
Fig. Accessory drive belt routing-Mitsubishi 3.0L engines
Check this for 3.0L DOHC, 3.0L SOHC Galant, And 3.5L Engines...
Fig. Serpentine belt routing-Mitsubishi 3.0L engines (except 1998-00 Galant models)
Zoom Image link: HERE
Zoom Image link: HERE
Hope this helps; also keep in mind that your
feedback is important and I`ll appreciate your time and consideration if
you leave some testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
SOURCE: engine sounds very loud on 2001 eclipse spider
it sure sounds like you need a timing light and a tension bar to tighten the timing belt you can't run it around for too long with it loose could cause damage to such a compact engine. Try loosening the nut/pulley that is attached to the loop shaped eyelette, hard to explain (it's made for the bolt to slide in) loosen just enough to put some tension against the belt and then tighten while still pressing against the tool of leverage careful not to damage what you are prying against. This will most likely help but you will most definately need to re time as the belt is no longer in the correct position.
1,377 views
Usually answered in minutes!
×