At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is only available at a Ford Dealership...Give them your VIN Number & they will give you the code...There is a charge for this service...Now, if you lost battery because you changed or disconnected battery you can avoid this happening in the future...Take a 9 volt battery...Remove the snap top from an old smoke detector...Solder the + lead to positive of cigar lighter plug and - lead to negative of cigar lighter plug...snap on 9 volt battery and plug into lighter BEFORE disconnecting car battery...The 9 volt battery will hold radio up while car battery is disconnected...saailer
Depends on the state you are in. call the DMV explain the situation with someone who knows something (hard to do) They register restored and kit cars all the time, they can always assign a VIN number.
If your lucky the code may have been written on the back of the manuel. If not and may not have been set try 0000, and if that does not work and your good with the dealer they may help you reprogram the radio free of charge since they are always disconnecting batteries.
You could always log on to www.radio-code.com and they can help you unlock your radio.
Good luck and hope this helps.
DOES SYSTEM INTAKE CODE YOU TYPE AND RETURN WITH ERROR MESSAGE OR JUST PLAIN HAS LOCKED SCREEN? SYSTEM IS DESIGNED SO THAT IF INCORRECT CODE IS INPUT MORE THAN THREE TIMES SYTEM LOCKS ITSELF.WHICH REQUIRES THAN THE NAVI UNIT BE UNPLUGGED FROM BATTERY POWER FOR ABOUT 5-10 MINS TO RESET ITSELF.NOW INCORRECT CODE CAN BE DUE TO WRONG CODE/SERIAL # CARD FOR VEHICLE, UNIT HAS BEEN REPLACED IN PAST POSSIBLY AND YOU ARE INPUTING CODE FROM OLD UNIT UNKNOWINGLY. YOU ALSO WANT TO MAKE SURE CODE YOU ARE TRYING TO INPUT IS FOR NAVI-SYSTEM AND NOT THE RADIO CODE FOR THE STEREO. IF ALL ABOVE CHECKS OK THEN NEXT STEP WOULD BE TO REMOVE UNIT TO RETRIEVE SERIAL NUMBER FROM BACK OF NAVI UNIT THEN GO TO NEAREST DEALARSHIP WHO CAN THAN RUN S/N THROUGH HONDA IN SYSTEM AND RETRIEVE CORRECT CODE FOR THAN SERIAL NUMBER. LET ME KNOW HOW IT GO'S
×