SOURCE: How do you replace a bulb(s) in the gauge cluster
remove plastic cover underneath steering column then take off the two bolts on a u-shaped clamp that holds the steering column up and let if fall easily to the seat now you should have a lot more room to get you hand back in there.
SOURCE: i have a 1996 chevy beretta 2.2l 4 cylinder, my
1996 Chevy Beretta 2.2 liter
Firing order 1-3-4-2
Cylinder # from passenger side to driver's side 1-2-3-4
Coil from firewall to radiator is 4-1-3-2
Good luck and keep me posted, Be glad to explain another way if i was a bit confusing.
SOURCE: im replacing the distributor and ignition wires on
move harness on top of engine .you might have a short.
SOURCE: I have a Chevy Beretta 1992 that won't start. It
Check for spark,and check for fuel pressure,and check for injector pulse,I hope you are using a digital volt meter,if not,you can blow the ecm,If there is no spark,or no injector pulse,then the crankshaft sensor is the most likely cause for the problem.If there is no fuel pressure,then the fuel pump in the fuel tank is bad.
176 views
Usually answered in minutes!
×