2005 Honda Accord Logo

Related Topics:

honda accord Posted on Aug 27, 2017

No power in original fog ligts honda accord 2005

I swich on lights and back fog light and frot fog lights as well and on board is everything fine, all lights are swich on working bud front fog lights are not working. I check all fuses all are ok and bulbs are ok bud no power is coming to front fog lights. I didnt check fog light relay because i dont know where is situatet. It is honda accord 05 reg. 2.2 i-icdti. can you help me?

5 Related Answers

Anonymous

  • 92 Answers
  • Posted on Oct 08, 2008

SOURCE: 2005 honda odyssey no low beam headlights

DIMMER SWICH, PROBABLY, WHICH IS INCORPERATED IN CONTROL ON STER. COLUMN?

Ad

Anonymous

  • 192 Answers
  • Posted on Apr 15, 2009

SOURCE: Both 2005 Honda Odyssey brake lights don't work.

make sure u have put the right bulbs in. rear brake lamps are dual filament....

bear34

Curtis Miller

  • 5 Answers
  • Posted on Apr 29, 2009

SOURCE: 1991 Honda Accord brake light probelm.

Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.

Anonymous

  • 51 Answers
  • Posted on May 16, 2009

SOURCE: ABS warning light staying on

YOU HAVE A BAD SENSER TAKE TO DEALER HAVE THEM REPAIR IT. THEY LIFE U SAVE MAY BE YOUR OWN

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Jul 15, 2009

SOURCE: how to change fog lights bulbs on my 2005 honda

548ae69.gif

  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

How to turn off abs light

Remove ur both battery wire and switch on lights and wait for 1 hour .then plug it back
3helpful
1answer

Have a 2005 honda accord and the maintance required light keeps blinking on and and off when i start the car up but it takes longer to stop blinking than the rest of the lights what could be wrong??

It's time for an oil change, then you reset the light.

With car off, press in your trip meter button on the gauges - while still holding it in, turn the key 2 clicks forward to power everything up but not to start it. Keep holding the button in until the light goes off. It will come on about 2 times per year reminding you to change your oil.
1helpful
1answer

HID will not funtion hooked up right. They won't light. Everthing works as it should hit hi beams fog lights go out hi beam light comes on inside on dash. Its easy hookup maybe missing something? This is a...

yeah, shouldn't be that difficult. red-power, black-ground. unplug them then put everything back to normal, then try them to see if the originals(low beams, high beams, fog lights) work ok. if they do it's in the wiring. turn on your low beams and that's the wires that you need. just find the one that sends 12volts to the low beams and hook it up to red on HID's then hook the black(ground) from HID to chasis, not the ground wire from car and check to see if they work.
0helpful
2answers

My honda accord 94 the stop light it on all time with car on/off

Brake light switch at fault, located at your brake pedal.
9helpful
1answer

How to change fog lights bulbs on my 2005 honda

548ae69.gif
  1. Remove the fog light mounting screw.
  2. Disconnect the connector from the fog light.
  3. Turn the socket about 45° counterclockwise and remove it from the housing.
  4. Remove the bulb from the socket.
To Install:
  1. Install the bulb in the socket without touching the glass with bare hands.
  2. Turn the socket about 45° clockwise to install it.
  3. Connect the connector to the fog light.
  4. Install the fog light mounting screw.
1helpful
1answer
0helpful
1answer

How to adjust front fog lights

Park the car in front of a garage door about 15 feet away, adjust the light so they point slightly down and a little to the right, this si all there is to it, the bolts that hold the adjustment are at the rear of the light behind the bumper..
0helpful
1answer

Car stopped working

I had a very similar problem with my 2005 accord a few months ago. Try jump starting the car with jumper cables. If the car starts and everything works normally, then the battery is probably your problem. This turned out to be my problem. Good luck.
Not finding what you are looking for?

180 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...