Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jan 13, 2012

How to replace town and country side mirror turn signal

Town and country 2009

1 Answer

Stan

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Oct 19, 2013
Stan
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Oct 19, 2013
Answers
1
Questions
0
Helped
2553
Points
0

With your thumb push the narrow end of the light back. The idea is to slide the light back a little toward the fatter end. This should free up the retention clip at the narrow end. Then gently pry out the narrow end of the light. I used a thin screwdriver and a piece of old leather to keep from scratching the mirror body. Once the narrow end is out the whole light will come out. unplug the old light. Do the reverse to install. Plug in the light. Put light in fat end first. Pivot the narrow end in. Slide the fat end towards the narrow end to seat the retention clip.

5 Related Answers

johnjohn2

Johnny Brown

  • 5763 Answers
  • Posted on Aug 07, 2010

SOURCE: 2003 Town & Country Van- trying to replace the

you will need to remove the door panel the connection goes down about 10 inches from mirror,

Ad

Anonymous

  • 324 Answers
  • Posted on Jul 04, 2010

SOURCE: Hi I have a 2006 Town and Country and I need to

take off the door panel on the inside and you'll find bolts that hold it on under there

Harry Goodwin

  • 365 Answers
  • Posted on Jul 02, 2010

SOURCE: replacing a brokem mirror on a 1996 chrysler town

directly behind the mirror on the inside of the door there will be a plastic triangular shaped cover
gently remove the cover using your fingers or something flat like a knife blade
once removed you will see a few holes in the metal of the door, in these holes you will see about 3 bolt heads which hold the mirror to the door, also you will see a multi wire block for the mirror wiring
seperate the wiring block and remove the 3 bolts holding the mirror to the door
don't even think about replacing the glass if that is all that is broken as it is a major drama
just buy a complete mirror assembly and fit to the door unless it is colour coded to the paint on the car in which case you will have to have it painted
re assemble in reverse order to disassembly
hope this helps

Anonymous

  • 88 Answers
  • Posted on Jun 01, 2010

SOURCE: Looking to replace passenger side mirror.

    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

Anonymous

  • 32 Answers
  • Posted on Dec 06, 2008

SOURCE: opposite side turn signal blinks on 2001 town & country lxi

try asking about replacing the multi-function switch...generally controls the headlt.dimming,turn signals,wiper speeds. kev-mn.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why are my hazards flashing when I turn on either turn signal?

It sounds like there may be an issue with your turn signal relay. The turn signal relay is a small device that helps to control the electrical current flowing to your turn signals. If it's malfunctioning, it may cause your hazards to flash instead of your turn signals when you activate them.
In most vehicles, the turn signal relay is located in the fuse box or under the dashboard. You can consult your vehicle's owner manual to find out the exact location of the turn signal relay in your 2009 Chrysler town and country.
Before you start checking the relay, it's a good idea to make sure that your turn signal bulbs are all working properly. If any of the bulbs are burned out or damaged, this can also cause your turn signals to malfunction.
If your bulbs are all working properly, you can try swapping the turn signal relay with another relay in the fuse box to see if that resolves the issue. If swapping the relay doesn't work, you may need to replace it.
If you're not comfortable working with electrical components, it's recommended to take your vehicle to a qualified mechanic for further diagnosis and repair.
0helpful
1answer
0helpful
1answer

How do you replace the mirror

Is just the bulb burned out in the mirror signal lens??
0helpful
1answer

2009 Chrysler Town and Country replace blower resistor

Behind the glove box. Open the box, tabs on each side to let it down.
0helpful
1answer
0helpful
2answers

2003 Town & Country Van- trying to replace the drivers side mirror but can't find the plug inside ... please help.

you will need to remove the door panel the connection goes down about 10 inches from mirror,
0helpful
1answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?

    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

0helpful
1answer

Removing and replacing passenger side mirror 2002 town and country van

there should be a triangle shaped plastic section on the interior of the door behind the mirror, check it for a little plastic screw cover to remove it or you may just have to lever it gently to remove it.
once it is off it exposes the mirror retaining bolts which you undo to remove the mirror, I presume it has electric mirrors and if that is the case you will have to find the electrical wire plug for the mirror and pull it apart, replace mirror in reverse order of removing
0helpful
1answer

Opposite side turn signal blinks on 2001 town & country lxi

try asking about replacing the multi-function switch...generally controls the headlt.dimming,turn signals,wiper speeds. kev-mn.
Not finding what you are looking for?

2,563 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...