Question about Chevrolet K2500

Open Question

Trouble codes error codes 29 36 39 68

6.5 turbo diesel with 4l80e transmission

Posted by bryan clayton on

Ad

5 Related Answers

Anonymous

  • 61 Answers

SOURCE: Transmission Fluid - 1987 Mercedes-Benz Diesel Turbo

It took Mercon Dextron III.

Of course, MD IV, V or Mutli-Vehicle would be better (the new multi-vehicle formula is what is being widely recommended by all nowadays).


Posted on Jan 19, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: 96 GMC k2500 Suburban 4x4 upgraded front acuator

on the top side of the transfer case near the shift arm ....there is a transfer case indicator swtch.... connect into the only brown wire on the switch.........Be sure to solder the wires together, scotch locks are a no no ,, will corrode and cause intermittent connection, wich can result in other 4 wd component damage

Posted on Feb 10, 2009

Ad

Anonymous

  • 4 Answers

SOURCE: what year chevy truck came with 454 tbi and 4l80e

should bolt on, but check starter bolts w/flywheel

Posted on Mar 27, 2009

Anonymous

  • 4 Answers

SOURCE: Blowing Gauge Fuse & Stuck in limp mode

I have the same problem and I have not yet found the solution. I am going to start by checking the wiring to the trans from the ecu but I doubt that is the problem. I am going to take a look at the shift solenoids, vss, range mode selector and torque converter clutch solenoid. Any ideas?

Posted on Oct 18, 2009

Anonymous

  • 62 Answers

SOURCE: 4l80e transmission interchange

700 r4 same tailshaft as 4l80 e . Also you can use any turbo hydramatic if you modify driveshaft

Posted on Jan 06, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Chevy 2500 he diesel and over drive pops in and out...now it will not shift from first


Automatic trans having overdrive issues - Diesel Bombers




www.dieselbombers.com > ... > 12 Valve 2nd Gen Dodge Cummins 94-98









Apr 22, 2011 - '96 dodge 2500 transmission is having trouble staying in overdrive. ... Hetold me it could be the Throttle Position Sensor, the computer needs ... Oh and another thing, The brake safety for shifting out of park is .... 95 chevy 3500 6.5l trans issues, drgracen, Chevy/GMC 6.2L and 6.5L, 1, 10-05-2015 10:13 PM.


Keeps Jumping in and out of overdrive

Mar 25, 2012


4l80 no overdrive or reverse

Mar 10, 2012


4l80E overdrive problems

Dec 10, 2011


More results from www.dieselbombers.com




The most ridiculous Overdrive questions - Diesel Place : Chevrole

Dec 02, 2015 | Cars & Trucks

1 Answer

4l80e transmission interchange


700 r4 same tailshaft as 4l80 e . Also you can use any turbo hydramatic if you modify driveshaft

Jan 06, 2010 | 1995 Chevrolet Silverado 2500

3 Answers

Will a 1994 chevy 4l80e 4wd swap into a 1995 GMC


Yes they will swap out nicely, the years where they made the change is in 1997 and the only difference is the transmission end housing has a different bolt pattern but has the same internal parts. You may also want to swap out the servo's with a corvette servo. The cost is around $45.00 and can be done without dropping the transmission pan, this will make your transmission shift firmer and will have less clutch slip[ between gear shifts. Good luck and hope this information helps. 

Aug 19, 2009 | 1995 GMC Sierra

1 Answer

4L80E Diesel Transmission Replacement


the gas tranny should work. gm was pretty good about keeping the same bolt pattern.

Jun 04, 2009 | 1992 Chevrolet C3500

3 Answers

Trans I.D. by vin code


I can tell you what engine is suppose to be in it by the VIN. I can tell you what transmission you have if you can describe the shape of the bottom pan. As far as the engine that you have that is tough. The engine size should be stamped on the rear of the engine near the distributor near where the engine and transmission meet. Rectangular pan 4 speed= 700r4 Pan like the state of Illinois, 3 speed= TH400 Squared off in front, tapers on both sides to the rear and slopes up to the rear, 4 speed=4L80E These are the only transmissions that were factory installed in a 1992 C1500. If it looks different let me know. You never know what someone has installed.

May 27, 2009 | 1992 Chevrolet C1500

1 Answer

Blowing Gauge Fuse & Stuck in limp mode


I have the same problem and I have not yet found the solution. I am going to start by checking the wiring to the trans from the ecu but I doubt that is the problem. I am going to take a look at the shift solenoids, vss, range mode selector and torque converter clutch solenoid. Any ideas?

May 02, 2009 | Chevrolet Silverado 3500HD Cars & Trucks

2 Answers

Can i use a 96 4L80E transmission in a 2000 Chevy Express Van


that trans is a little to lite duty for a diesel, u can use it but u will need to install the computer and the correct wiring harness.

Mar 01, 2009 | 1995 Chevrolet C/K 2500

1 Answer

My 1994 f250 transmission errors after going uphill!!


You are setting a trouble code on engine problems, have truck scanned to find error. Trans. will go into safe mode in this instance and this is why shifts hard.

Feb 12, 2009 | 1994 Ford F250 Supercab

3 Answers

1995 chevrolet 3500 transmission


I own a shop, and think you should have a 4L-60 in it. These look just like a 700 R-4, but aren't. There isn't much difference in them, but according to my books it should have the 4l60, but some were 4l80. The 4l80 was mostly for the diesel engines though. Glad to help out, Good Luck!!!

May 14, 2008 | 1999 Chevrolet 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23515 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...