SOURCE: serpentine belt diagram for my Ford V6 4.2L 97'
Lower left is the tensioner and above should the idler. Sometimes there is a diagram on the fan shroud or near the radiator. Without a picture I hope this makes sense.
Starting with the ac going over the top of its pulley and down to the power steering, to and under the crank shaft, going in and up and around left over the water pump to the tensioner (going under) and to the alternator over the top and then under the idler.
SOURCE: 2002 Ford Escort ZX2 serpinten belt routing & tensioner pulley
go to www.gates.com on the lower right hand side under popular topics, click on timing belts, then on the left hand side click Parts Locator and Interchange, enter your cars info and the first page that comes up will show you a camera icon for a pic of how your belt is routed. The tensioner pulley is the one mounted on a silver arm, usually at the top. Hope this helps let me know.
SOURCE: power steering pump on a 2001 ford windstar
There is a special tool for that. It should be available at most auto parts stores.
SOURCE: serpentine belt routing diagram
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies....
http://www.2carpros.com/car_repair_information/year/1998/make/ford/model/contour/1998_ford_contour_drive_belt_routing_diagram.htm
SOURCE: need schematics or diagram of fuse box 1990 ford f150
my email is [email protected] and i have a 1991 f150 so the fuse boxes should be the same so i will take a pic of it and send it to you
1,210 views
Usually answered in minutes!
I just had to go through bypassing the ps pump. Blew the high pressure line and no replacement for a few days. My 03 has ac and I routed it as per the drawing on the rad support for a truck without ac, but kept the compressor in the loop. Gates Belt k060895.
×