SOURCE: 1989 cutlass oldsmobile with tilt steering wheel ?
remove column trim, insert ket turn to on position, and push the pin in at the underside of the steering column pull straight out please rate -jeff
SOURCE: steering column is loose need instructions how to
If you look under the dash. You will see a support bar with a bolt on each side. This hold column in place. The other connection is where the column sits inside gearbox. The gears could be worn or box is loose.
SOURCE: steer wheel assembly
Hello Kimkaye.
There are three bolts that have come loose and will need to be tightened.
Some special tools will be needed to disassemble in order to access these bolts.
I would recommend a professional to do this job for you as there are many parts and pieces to contend with in this job along with the supplemental restraint system (airbag).
124 views
Usually answered in minutes!
×