SOURCE: instructions for replacement of side view mirror
the door panel near the mirror must be removed if not the entire door panel inside u will find 3 nuts to remove to get the old mirror off. hope this helps please rate me
SOURCE: replacing a cracked side-view mirror
well the best way is to take the inside mirro cap off there are 3 bolts that need to be taken out 10mm if its not accessible from there you need to loosenthe trim panel and take it off look around for hidden pop ups take the pop ups out and take the screws out then from there pull the bottom of the door trim out and slide arms around the edges and pull out there then pull up and outThanks for using fix ya. Please rate my response thank you very much
SOURCE: Replacing passenger side-view mirror on 1999 Dodge Stratus
Watched my dad do it this afternoon. There is an exposed screw on the left side of the door panel and one at the bottom of the panel. There are also two hidden screws, one behind the door handle and one inside the little hole in the armrest (pop off the plastic plugs). There are also three recessed screws behind the speaker cover. You can pop the speaker cover off with a flathead screwdriver. I'm pretty sure thats all of them. You can pop the panel off then, but watch the wires connecting stuff inside. The hardest part is getting it over the door lock. .
Once the panel is loose you have to pop off the black plastic cover hiding the back of the mirror. There are three recessed bolts holding the mirror. My dad had to get a special wrench to get those off and he dropped one inside the door, so be careful (we fastened a magnet to a coat hanger and got it back). Mine had some remote gizmos, so he had to had to unplug the little square thing and then popped off what was left of the old mirror. If your new mirror has a wire with a little box, feed it through the hole and plug it in. Once you have it positioned correctly, you can screw on the bolts and put eveything back together. It helps to have another person there while you are trying to position the mirror correctly. Hope I didn't miss anything. Good luck!
SOURCE: How to remove side view interior mirror control switches
You need to remove the door panel. there are 2 t-25 screws behind the pull handle (some models do have only one screw) as well as you must remove about 9 push buttons. then the door panel will pull away from the door itself then you can get to the mirror switch
SOURCE: Side View Mirror Installation instructions needed
Remove the plastic panel on the inside of the door and disconnect the connector running to the mirror.
215 views
Usually answered in minutes!
×