Question about 2005 Chrysler Pacifica

1 Answer

Want to know how to remove and install a radiator in a chrysler pacifica 2005

Posted by jarrell pate on

Ad

1 Answer

chargerhp

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chrysler Master
  • 815 Answers

Facing car right hand side lower radiator remove drain plug on cold engine. If your radiator is bad the hoses are old to cut hoses off one top one lower. Have a shop discharge AC.Remove fan connectors.Remove the front fascia (the front of the car blocking the radiator from coming out. The painted part like you got hit in the front and had to replace the front cover) Remove AC lines. Remove transmission cooler lines. Remove push pins holding top plate on radiator. Remove right and left push pin brackets.Remove AC condenser side brackets.Lift up condenser and set back down in front of radiator.Lift radiator out and remove cooler and fan Assembly.If you want the original antifreeze go to dealer or Napa Zerex G5 same thing was 15 a gallon takes 1 and a 1/4 gallons + distilled water 50/50 Sounds like a lot of fun let me know how long it takes

Posted on Dec 13, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the radiator bleed valve for 2005 chrysler pacifica


Hi Mitchelle, I\'m glad to help! The drain cock on any radiator is always at the bottom of the radiator. Unfortunately they wanted to funny and put it in an almost impossible place to get to. Its actually on the right side if your facing the vehicle, unless someone has put a different radiator in the car, if thats the case I\'m not sure. Hope this helps and have an awesome day Mitchelle!

Apr 26, 2014 | 2005 Chrysler Pacifica

1 Answer

Remove radiator


Here's a link on removing your radiator.

Jun 19, 2013 | 2005 Chrysler Pacifica

1 Answer

It Started about 6 months ago on my 2005 chrysler Pacifica v6 3.8. my upper radiator hose colapses when i rev the engine up and it gets really hot. i can tell by the smell. i have replaced my thermostat...


REPLACE UPPER RADIATOR HOSE IT IS TOO SOFT WORN OUT CAUSE HOSE TO CLASP.I WOULD REMOVE THERMOSTAT FLUSH ENGINE BLOCK AND RADIATOR COOLANT SYSTEM NEED FLUSHING OUT.

Dec 14, 2010 | 2005 Chrysler Pacifica

1 Answer

I have a 2005 Pacifica 3.5. I want to replace my car starter. Where is it located?


It's in the front. Remove the cover over the radiator then the coolant line bracket remove the bolt from the front engine mount support engine remove bolt on trans and anything else that would be in the way remove starter. Time for a shop to do this is two hours so give yourself a day

Jan 07, 2010 | 2005 Chrysler Pacifica

1 Answer

Location for radiator cap and drain plug


Where oh where is the drain plug for the radiator on a 2005 Pacifica

Apr 06, 2009 | 2004 Chrysler Pacifica

1 Answer

I need to replace the thermostat for a 2005 chrysler pacifica


Follow the Upper Radiator Hose to the Block. There is a Bell housing there that the Hose Connects to. Remove that Bellhousing and the Thermostat is Right Under it.

Jan 15, 2009 | 2005 Chrysler Pacifica

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

2,766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...