Turn signal not working

Check the wiring from the signal stalk

check turn signal fuse if ok check turn signal flasher unit.

You need to replace the turn signal flasher with a heavy duty one.

there is no specific fuse for turn signals, you are looking at a switch or flasher

Hi there,

I'm assuming neither of your turn signals work?

Firstly, check the 15A Turn fuse in the fuse box. If fuse is ok, then operate your HAZARD light function.

If no Hazard lights operate, then suspect a probelm with the Turn Signal Flasher unit.

If Turn signal flasher tests ok, then fault lies within the Turn switch.


"If this has helped you in any way, please rate this solution"

that could easily be just the fuse or the flasher unit. both are on the driver side under the dash

there is most likely a short in the wires have you put a tow package on it if so did you splice in to the lines check all wires and see if they are burnt any were most likely short

if i remember right it is under the dash by the stereo console.thanks for using fixya!

Problem solved, Since 3 of the 4 turn signals worked I did not fuse was a problem
but after checking the turn swithch, I pulleded out the fuse which looked ok, but when
I put it back in all the turn signal lights woked! Apparently just one part of the surface
of the fuse was corroded.