An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: my fuse blows when I turn on my parking lights
This is morelikely a connection problem some wire is causing this short circuit and the result is the fuse being busted, so first thing to do here is to check all wiring and make sure everything is connected properly....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Park, Tail, Marker Lamps, and License
The park, tail and marker lamps, including the license lamps, turn on when the headlamp switch is placed in either the PARK or the HEAD position, or anytime the headlamps are requested. The RT I/P #1 fuse in the RH I/P fuse block supplies battery positive voltage to both the park lamp relay switch contacts and to the park lamp relay coil circuit. The park lamp relay coil is controlled by the body control module (BCM). When the headlamp switch is placed in the PARK position, the BCM energizes the park lamp relay coil control circuit.
Current flows from the park lamp relay switch to both front and rear park lamp fuses and to their respective park/tail lamps. The front park lamps are grounded at G101. The rear park lamps are grounded at G302. The license plate lamps are a part of the rear park lamp circuit and are grounded at G302. The inadvertent power control feature prevents the park lamps from remaining on more than 10 minutes if left on. If the park lamps are turned on after the ignition switch has been turned OFF, or is in the ACCY position, they will remain on until turned off or until the battery runs dead.
Did you the REAR PARK LP fuse 15 amp in the right insturment panel fuse box.
Normally, an burened out brake light fuse will prevent the shifter from coming out of park. A bad brake pedal switch that activates the brake lamps could also cause this issue. A more remote cause would be a shorted out trailer harness, that is causing the brake light fuse to blow.
YES -- process of elimination. Obviously there's a short circuit in the Brake/Headlight circuits - right? Blown fuse(s) is/are evident of this -- would you agree? Which fuse(s) is/are blowing? An analysis tells you that the only time a fuse blows is when the headlamps are turned on -- correct? Otherwise, brake lights work normally -- right? OK. Head lamps have relays which turn them on. Here's a wiring diagram of the 2000 Hyundai Sonata (NOT the Jeep Grand Cherokee)
It would appear the problem is with one or more bulbs or sockets or both. As you many notice, there are no connections between the headlamps and brake lamps except the parking lamps (which share the bulbs/sockets)
When the headlamps are turned on, so does the tail lamp relay. As you can see, these bulbs/sockets are 'DUAL' filament to ground (series-parallel circuit). Just a guess here - the short is in one of the lower rear brake/parking lamp bulbs/sockets.... just a guess.
Hi my Name is Marcus . I have a 99 toyota corolla and i have problems with the brake lights . I have change the bulbs . I have check my fuses , i have also change the brake pad switch . I was told that i to change the brake switch with a part for Toyota Dealership . Plz help me