1988 Honda Prelude Logo

Related Topics:

Dale Posted on Oct 17, 2011

How do you remove a transmission from a 1988 honda prelude

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Oct 01, 2008

SOURCE: transmission solenoids Prelude

Which tranny solenoid are u reffering to? What is the actual problem u r having?

Ad

Anonymous

  • 116 Answers
  • Posted on Mar 15, 2009

SOURCE: Honda Prelude Sunroof

go to a Honda Dealership and ask them to order a new sunroof gasket replacement kit. they have em and they may even have instructions on how to remove the old and install the new. I've had awesome experiences with the Honda parts division. Hope this was the answer you wanted. (don't even look for an after market one..unless you want a nightmare)

Anonymous

  • 192 Answers
  • Posted on Apr 21, 2009

SOURCE: 99 Honda Accord and Prelude Transmissions Interchangeability

the trans will actually bolt up to the engine..but it will not work properly without the pressure switch plugged in to the harness... if u notice, there is a hole with no threads in the prelude trans..u couldnt even thread a 3rd gear pressure switch in the trans case..trust me ive seen it b4 at the dealer where i work.. i even went as far as installing the trans and when going back together, saw the difference when trying to plug the harness in...its not the same..i laugh about it now, but was very mad at myself at the time for assumeing the parts guy brought me the right part..the guy with the prelude was about to install my accord  trans in his prelude ...luckily i was able to stop him b4 he installed my trans in his prelude...i laugh about it now

Anonymous

  • 3533 Answers
  • Posted on May 03, 2009

SOURCE: i need to locate the fuel pump cutoff switch on a

for the most part its back in the trunk area and sometimes behind a small panel and its a small yellow button

Matthew Raker

  • 61 Answers
  • Posted on Sep 22, 2009

SOURCE: hi,can u please email me a honda prelude 1988 fuse

  1. Heres one!
943bf8f.jpg

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I put my 1989 Honda Prelude engine (auto) into a 1988 shell with manual transmission, and now my revs stay high only when driving and changing gears. Was wondering if it is a vacuum hose issue and how

may need to swap the computer also.. manual computer is different..but yes.. be looking into any vacuum leaks..block off any open ports you find..
0helpful
1answer

My 1988 honda prelude s model autotrans. 2.0 liter slipped now all i have is low gear

either your shift solenoid on the inside of your transmission have gone bad or the gears have got worn out
2helpful
1answer

1988 honda prelude manual tranny,won't start,put in a new starter and still the stater will not turn on, check fuse,oil,battery, what else can i check?

Have you checked the neutral safety switch? The switch is designed to prevent the vehicle from starting unless the clutch is fully depressed. I am not quite sure where the switch is located, it may be under dash on clutch shaft or the transmission. Keep me posted on this matter.
0helpful
1answer

How do i remove the odometer/spedometer cable from the transmission on a 1993 honda accord

There is no mechanical cable linking the transmission housing to the meter panel. There is a electrical connector located on top of the trnasmission housing connecting to the speed sensor, close to the drive shaft.
1helpful
1answer

Cambelt

You can download the entire manual from www.pdftown.com
Here is the link to the shop manual for the 88 prelude that I used to do my Cam Belt.
http://pdftown.com/Honda-Prelude-1988-Service-Manual.html
Hope this helps...
0helpful
1answer

Honda Prelude Sunroof

go to a Honda Dealership and ask them to order a new sunroof gasket replacement kit. they have em and they may even have instructions on how to remove the old and install the new. I've had awesome experiences with the Honda parts division. Hope this was the answer you wanted. (don't even look for an after market one..unless you want a nightmare)
0helpful
1answer

1988 Honda Prelude (Maintence)

tire rotation, air filter, breather element,
Inspections:
Timing belt for wear and tear
other belts be it V-belts or Serpentine
radiator fluid (older than 3 years needs a flush and fill)
transmission fluid and filter change. if its a manual transmission then change the gear oil
Battery inspection
Ignition system--- Spark plug gaps,wires,cap and rotor and coil inspection.
Motor Mounts inspection
Other things good for a car of that high of mileage are flushing out the old brake fluid and filling with new....same for power steering.
mostly inspections
Last but not least... put a can of Seafoam* into your gas tank and drive it on the highway for at least 30-45 minutes. congrats on your high mileage honda :-]

0helpful
1answer

1988 Honda Prelude won't start

Not really enough info! Does it crank over asnd not start??? Frankster016
0helpful
1answer

1988 honda prelude S

No quick fixes, once it slip the transmission is pretty well done due to damage to the clutch packs, pull the pan and see how much debris is in there, if it is allot then an overhaul is needed, I would suggest that all the shift solenoids be replaced during the fix, also make sure th connector to the tran is in good condition, no loose pins or damaged connector locks.
Not finding what you are looking for?

105 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...