I have a2006ford explorer n I have a code p0320andp0302 and the truck loss of power

P0320 - Ignition Engine Speed Input Circuit Malfunction, indicates that two successive erratic profile ignition pickup ( PIP ) pulses have occurred.
Some possible causes are : loose wires / connectors , arching secondary ignition components ( coil , wires , + plugs ) , on board transmitterP0302 may mean that one or more of the following has happened:Faulty spark plug or wire; Faulty coil (pack); Faulty oxygen sensor(s); Faulty fuel injector; Burned exhaust valve; Faulty catalytic converter(s); Running out of fuel; Poor compression; Defective computer
If there are no symptoms, the simplest thing to do is to reset the code and see if it comes back.
If there are symptoms such as the engine is stumbling or hesitating, check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the car, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). In some cases, the catalytic converter has gone bad. If you smell rotten eggs in the exhaust, your cat converter needs to be replaced. I've also heard in other cases the problems were faulty fuel injectors.
Beside, DTC table with their meaning for you: http://www.chinasinoy.com/upload/service/diagnostic-trouble-code-table-02.pdf

Hope this helpful.
Best regards.