Question about 2001 Daewoo Leganza

What is the cam and crank timing marks on a 2001 daewoo leganza

1 Answer

Joseph Hoffmann

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.
Master
1,755 Answers

Hi, The timing is 6* of TDC. on a 4 cylinder engine. Hope this helps

Posted on Oct 09, 2011

Joseph Hoffmann Oct 11, 2011

The timing marks are located on the upper crank pulley. You can find it by using a timing light near there. The second mark will be the mark that you need. 6*degree of TDC.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Had cam crank sensor replaced for 2001 Daewoo Leganza; but can't find how to resynchronize- not reset it.

It has to do with a PC car scanner.

Jan 14, 2015 | 2001 Daewoo Leganza

2 Answers

Daewoo front crank seal leak

front seal on the timing cover? Maybe your leak is coming from another place? You might need to talk to another daewoo owner or find a forum for your car and research there. good luck.

Oct 30, 2011 | 2001 Daewoo Leganza

1 Answer

Need the timing mark on a 2001 daewoo legonza

I have a two-volume repair manual for the 2001 Daewoo Leganza. Timing should be set at 6 degrees before top dead center. Hope this helps.

Oct 09, 2011 | 2001 Daewoo Leganza

1 Answer

Which timing mark do i use on the exhaust on a daewoo leganza

The intake cam is marked by a notch (left hand side of motor) and exhaust is marked with an arrow (right hand side of motor) both pointed 12 o'clock position to notch in cover

May 20, 2010 | 2001 Daewoo Leganza

1 Answer

2001 daewoo leganza i need a diagram for the timing marks

On cam gear where it mark (intake) to the left of that there will be a mark (line) and the other gear where it make (exhaust) to the left of that there will be a mark (line), align both of those marks at about 12:00 o'clock, there will also be marks on the timing belt back cover, on the crack shaft gear there will be a mark also align that mark at 6:00 o'clock, there will be a cut on the housing align both mark's together.Hope this was very helpful

Jan 22, 2010 | 2000 Daewoo Leganza

1 Answer

The timing marks for a 1999 daewoo leganza

Both cams have a notch in their edges, those go straight up parallel with each other pointing at the marks on the valve cover. Crankshaft pulley also has a mark that lines up with a mark on the timing belt rear cover.

Dec 20, 2009 | 1999 Daewoo Leganza

1 Answer

Daewoo leganza 2000 2.2 liter if all the timing marks are alined right is the number one piston at top dead center? or is all the pistons at equal stroke

It should be top dead center on a compression stroke and all the valve are closed. Both cams have a line the lines up with marks on the valve cover. Basicly the marks on the cams both are set to point to twelve o'clock. The mark on the crank shaft pully points to 6 o'clock or strait down

Oct 10, 2009 | 2000 Daewoo Leganza

1 Answer

Timing marks on daewoo leganza

I have a 2001 daewoo product knowledge training manual. Please contact me at [email protected]

May 17, 2009 | 2000 Daewoo Leganza

1 Answer

I AM REPLACING THE TIMING BELT ON MY 1999 DAEWOO WITH 1.5 LITRE ENGINE AND NEED TO KNOW THE TIMING SPECS SO I CAN SET THE TIMING ON THE CRANKSHAFT....ALSO I NEED TO KNOW THE T.D.C. ON THE #1 CYLINDER FOR...

single cam
cam at 12 o clock
crank at 6 o clock
marks in rear timming cover

twin cam
cams marks face each other 3 & 9 o clock
crank at about 6 o clock mark in cover
all marks are visible on gears and covers

May 15, 2009 | 1999 Daewoo Leganza

1 Answer

2001 Daewoo Laganza Timing Marks

Hi...
On your request,
For the Crankshaft timing MARK.
You need to remove the cover, the Timing mark is inside.
Your Information is right.
The cam's at 12 O clock. Remember the left side Intake and the right side Exhaust.
Because each of the Cam sproket have the sign , Intake and exhaust

Ok. I hope this help on your question.
I have Pictures of all the marks. But to send you pictures I need any E-MAIL adress.
Because this site don't let me send more than 150kb. and the pictures are around 250kb.

Thank you for use fixya...

Oct 26, 2008 | 2001 Daewoo Leganza