How do you remove the cigarette lighter socket from a 2007 chevrolet silverado pickup truck

adam jackson

• 25 Answers
• Posted on Mar 09, 2009

SOURCE: cigarette lighter socket replacement

You have to insert needle nose plyers into the socket and turn counter clock wise . hope this helps !

SOURCE: Land rover Defender 90 cigarette lighter install

should only be a black for earth and red or yellow for power if u already have wired up to a powr source just connect to back of lighter if you dont ground the black wire to the mwal part of the car usually under a screw under the dash will do and run a red wire to 10a fuse in fuse box thats the easiest way

ZJ Limited

• 17989 Answers
• Posted on Jul 21, 2009

SOURCE: replace cigarette lighter

Review the section ZJ-Secc-8E-Instrument-Cluster-and-Gauges in the page 8E-5 you can find the graphics about this work.

Good luck!!!

Brandon Johnson

• 253 Answers
• Posted on Aug 07, 2009

SOURCE: My 2004 Audi A4 Cigarette lighter socket surrounding broken

Hello, hope this info helps...(subytech1)...Cigarette Lighter In Center Console, Removing And Installing (Vehicles Up To 10.04)

Special tools, testers and auxiliary items required

• Torque wrench V.A.G 1783

• Removal:
• Remove center console.
• Turn center console - 4 - around.
• Remove two bolts - 3 - on cigarette lighter - 1 -.
• Disconnect harness connector - 2 -.
• Remove cigarette lighter - 1 - from recess - 5 -.
• Installing: Installation is reverse of removal.

• Tightening torque 2 Nm

SOURCE: My 2003 Chevrolet Avalanche front accessory socket

The fuse is in the engine fuse compartent and should be labled aux pwr 20 amp fuse(yellow)