Dieselizing I have a 65 Mustang 200 ci engine when I drive it and shut it off the engine dieselizes. What do I have to adjust to stop the condition?

it is a 3 step torque 1 st is 55 lb then 65 and final is 70-75 lb

Do all

Here is the diagram. Let me know if it works.

On my '65 w/200 cid, the return spring is indeed hooked to a flange on the exhaust. Seemed a bit wierd, but that's what I've seen on other 200cid Mustangs.

Check the shift rods for binding, also check the hole ends, are the bushings bad? Hope this helps, let me know

It.s very,very normal. For example-your thermostat opens at 87 C.for petrol engines and 93 for diesel engines.

Check the points and make sure that the gap is set correctly.Then try replacing the condensor.This part is often overlooked and will prevent the engine from startig.

Make sure you were given the right plugs for the car (correct heat range) also check the choke plate after the car warms up to ensure the choke plate is all the way open.

Your door switch is out of adjustment or is just going bad. Even if your interior lights turn off when you shut the door, the switch is still out of adjustment or just going bad. take it to the dealer and have them look at it. they should be able to solve the problem for $20.00 or maybe even for free if you have them do other work like an oil change.

2wo screws on spring loaded bezels for headlight frame....up/ down...in / out