Question about Mitsubishi Lancer Sportback

1 Answer

My mitsubishi verada 97 requires H7 light bulbs although some one has fitted H4 bulbs which are three pronged. H7 are 2 pronged but narrower and will not fit socket. Is there an adapter or a workaround. The h4's are very dim because the socket only connects with 2 of the 3 prongs

Posted by aaron665 on


1 Answer


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Veradas use a special two pronged bulb. I'm not sure if it is a two pronged h4 or a larger h7.
Switch you're high beam lights to the normal beams for the time being (assumeing they are working fine) then take it to mitsubishi for new bulbs

Posted on Sep 17, 2011


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the brightest replacement headlight bulb for a 1999 Toyota Camry?

in older vehicles you put a 100- 125 watt H4 bulb (with relays ) as the reflector was metal and could stand the heat
modern cars use plastic reflectors so going over 65-85 H4 would probably melt the reflectors
Leds are a better option as they produce little heat but the installation is not straight forward as they need ballasts fitted to activate properly
I would have a talk with an auto electrician that knows how to fit the led lights and what is required.

Aug 23, 2015 | 1999 Toyota Camry

1 Answer

Can I fit a h4 bulb in my mercedes?

No it takes type H7 (GE part number H755)

Jan 14, 2011 | 2001 Mercedes-Benz C-Class

1 Answer

Convert h4 headlights to twin h7 units wiring

Its a wiring issue.

Your dip switch is selecting one or t'other rather than turning the high (second) lamp on and off, no?

You will have to mod the wiring so the dip lamp is always on when h/l's are on and the main beam is brought on as well when you go to main.

This may involve fitting a new switch and modding the wiring feed. i.e H7 switch and wiring.

Jan 24, 2010 | 2002 Land Rover Freelander

1 Answer

Low beam light bulb issue rsx type s acura 05-06

The three prong base is just the bulb holder.

Here is an excellent tutorial on how to change the build:

Jan 22, 2010 | 2005 Acura RSX

2 Answers

Nighthawk platinum h/light bulbs. What is needed to install them? Fittings differ from original. Its a 2009 model.

If your looking at a larger "fitting" it may be pulled off the bulb and installed on the new one. Then fit to vehicle.

Jan 16, 2010 | 2007 Hyundai Santa Fe Limited

1 Answer

Nissan navara d40 replacement globe for genuine foglight (eg H2 . H4 . H7 . )

you can buy at any parts store and most will install them, but if not left twist the bulb or unscrew the backing plate then without touching the bulb plug it in and reinsatll.

Jul 01, 2009 | 2008 Nissan Pathfinder

1 Answer

What size bulb is an audi s4 headlight and fog light?

SYLVANIA H7 SILVERSTAR HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- 55 Watts, Single C-8 filament for use as either high beam or low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light colour similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements. Fits Driver or Passenger Side Driver or Passenger Side Fits the following vehicle/s
2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L RAMPAGE FOG LIGHT, BLACK METAL HOUSING, With round clear lens; Includes 100-Watt H3 halogen bulb, one lamp and a single bolt mounting system; Provides better illumination Fog Light

  • Fits the following vehicle/s: 2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L;

Jun 24, 2009 | 2004 Audi S4

1 Answer

How do I change my headlight bulb

go to your parts suppler and ask for a H4 globe pop your bonnet and remove the plug on the back of your head light then remove the rubber boot paying attention to which way it cam off then you will find a spring clip unclip it but be careful not to damage its anchor point. remove old globe an throw away take new globe out of box DO NOT TOTCH THE GLASS OF THE GLOB AS IT WILL CAUSE THE GLOBE TO BLOW STAAIGHT AWAY AFTER FITTING IT handle the globe by the metle bass and fit it, refit spring clip and rubber boot fit the plugf and check the operation of the light

bingo you are done have a nice day

Dec 21, 2008 | 1999 Mitsubishi Mirage

2 Answers

How do you change a headlight on a 2006 kia sedona?

Left front low or high beam headlight: remove battery, remove weather cap, pop-off 2-prong connector, depress spring holding bulb in position, use inspection mirror if necessary, one end of spring is caught beneath a lip, Move spring past lip and lift up, it will rotate upward and is fastened on opposite side. Remove old bulb, install new 55 watt halogen bulb (H7-55) available at Walmart. Install new bulb with tang in slot at bottom, fold over spring and depress to hook end under latch point, install 2-prong electrical connector, install weather cap, turn about 1/8 turn to lock into position. Reinstall battery, clean terminals and cable ends, place new no-corrode rings (available from Walmart) around battery posts, install cable ends, and tighten.

Right front headlights: not necessary to remove battery, otherwise same essential procedure.

Note: Lower and upper beams all use same H7-55 bulb.

Jul 24, 2008 | 2002 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides