2004 Chevrolet Venture Passanger Logo

Related Topics:

Posted on Sep 16, 2011

I can not get my hood open on my 2004 chev venture. Is there another option other than the hood release cable?

5 Related Answers

Anonymous

  • 23 Answers
  • Posted on Apr 25, 2009

SOURCE: can not open hood

Will start simple:
If the handle is broken inside car, find cable end pull with pliers, the handle is replaceable by itself from dealer or junkyard.

If you are pulling handle and hood will not pop up, have a helper pull up on front of hood and lightly bump down on hood near the latch with their hand or fist(careful not to dent) while you pull on handle and it should popup, now lube it before you close it, the hood may then need to be opened and closed several times to work lube into latch(this sticking is common when latch system is not lubricated regularly).

If the before mentioned does not work...the cable could be detached at latch which is usually caused by: lack of lubrication and/or trying to open hood in winter after going through carwash.
Now things get trickier and you're best finding a shop that can raise the car up so that they can jimmy it from below.

Ad

Anonymous

  • 360 Answers
  • Posted on Sep 25, 2008

SOURCE: hood release cable

your gonna have to trace the cable to the latch thru the grill and try to "hook it" with a long pic or somthing like that. thats the only way to open it. good luck jimmy

240cpa

  • 548 Answers
  • Posted on Dec 27, 2008

SOURCE: hood release cable is broken

Is there any part of the cable inside the cabin that you can pull with a pair of pliers? I suggest that you try that. You may need to disassemble it from the pull handle to make that work.

defadad

Harry Goodwin

  • 353 Answers
  • Posted on May 23, 2009

SOURCE: hood release will not release hood cable is not broken

the outer cable may have come loose near the lock, if the grille screws are accessable remove the grille and you will have access to the underside of the lock, you may need a screwdriver to push the lock lever aside to unlock the bonnet

Anonymous

  • 13 Answers
  • Posted on May 27, 2009

SOURCE: Broken tab to hood release cable

Get a long screwdriver and try to release the secondary latch that way. Or if you have small hands reach up under the hood and pull the secondary latch toward the left.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do i open the hood on a 1998 chev silverado if release cable is broken

The best way is to reach up from underneath and pull the lever that the cable is connected to while someone pushes down on the hood. This should release it. I've seen some ppl bust a piece of the plastic grill to get to it, but there is no need. Good luck
0helpful
1answer

Where is rear brake light fuse 2004 chev venture

because no one else did I will tell you where that very elusive second fuse box is hiding open the passenger door and it is directly to the right of the glove box hope this helps
0helpful
1answer

Hood latch cable fails to release hood when

I would try pushing down and pulling up on the hood while someone operates the hood latch. I'd try to spray some WD-40 between the hood and grill area. From underneath, you may be able to use a long screw driver to try to move the release lever over to release the hood.
2helpful
1answer

Hood latch

Try spraying the latch mechanism with WD-40 or similar light oil and operating the release cable a number of times. Check the condition of the release cable if nothing happens. The latch itself may have a broken spring due to the low temps.
0helpful
1answer

Hood latch cable is broken on my 99 chev cavalier

is the latch from the interor car broken, or the locking mechenism to release the hood not working?

Either way its a simple fix just requires the hoot to be open.
0helpful
1answer

2004 Nissan Titan. Hood release under dash is not working. There is no tension when it is pulled.

chances are that the cable broke, youll have to open the hood from under the car, and then replace the hood release cable.
2helpful
2answers

Broken hood release on 98 chev 1500. How can I get it open?

if it is broken at the handle you should be able to grasp the cable with pliers to pull it otherwise you will have to go out front of truck and the best way i found requires long arms, but you would have to use a flashlight and slide under front bumper and look upward to find cable/latch assembly. You may be able to do it through the grill but if cant see it through the grill under neath.if you in front of truck pull latch to right and it will release.
0helpful
1answer

Chevy optra 2004

buy a new hood cable and have it ready for the repair. take a pair of pliers or vise-grips and grip the the cable for the hood release. As long as the cable is intact then pull on it and the hood will release. If you pull it and it does'nt release you may need someone to help and pull up on the hood while you pull on the cable.
0helpful
1answer

Ford excursion

you will need to locate the hood release cable behind the pull handle and pull the cable with pliers and once the hood is open you can rig something through the grill to open. But I would recomend replacing the cable or the pull release to keep others out from under hood.
Not finding what you are looking for?

720 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...