Question about Ford LTD

1 Answer

NEED THE VACUUM LINE DIAGRAM FOR A 1972 FORD LTD WITH 429 ENGINE

Posted by merc51 on

  • 1 more comment 
  • merc51 Sep 16, 2011

    Hi, diagram will help but my dist has tow vacuum connections i have been told that one is to the carb and the other to the vacuum manifold??? Any help? Bob

  • merc51 Sep 16, 2011

    THE DIST IS A NEW REPLACEMENT FROM O'REILLY PARTS. THEY SAID TWO WERE LISTED AS FITTING THE 429 . ONE WITH ONE VAC PORT AND ONE WITH TWO. SO I HAVE THE ONE WITH TWO. THE CAR WAS JUST PURCHASED AND I HAVE REPLACE THE TIMING CHAIN, WATER PUMP AND DIST BUT SOME OF THE VACUUM HOSES "LOOKED" WRONG . THAT IS WHY I AM LOOKING FOR A COMPLETE VACUUM DIAGRAM TO MAKE SURE THINGS ARE RIGHT. THANKS FOR YOUR HELP. BOB

  • merc51 Sep 16, 2011

    LOOKS JUST LIKE THE THE ADVANCE UNITS VC 199 OR VC200

×

Ad

1 Answer

ZJ Limited

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,970 Answers

Check this diagrams for 1972 LTD with the 429ci motor (click images for zoom)...

NEED THE VACUUM LINE DIAGRAM - zjlimited_1847.jpg

Fig. 2: Vacuum schematic-1968-72 V8 engine with manual carburetor


zjlimited_1848.jpg

Fig. 3: Vacuum schematic-1968-75 with Feedback Carburetor (FBC)

Hope this helps.

Posted on Sep 16, 2011

  • 1 more comment 
  • ZJ Limited
    ZJ Limited Sep 16, 2011

    Its possible that you Dist has been modified? Generally, your guess could be right.

  • ZJ Limited
    ZJ Limited Sep 16, 2011

    Check this for 1972: FORD: LTD: V8 7.0L 429 cubic inch 4bbl (N) OHV: Ignition: Distributor Vacuum Advance... rockauto/catalog/x,carcode,1130443,parttype,7232 and CONFIRM.






  • ZJ Limited
    ZJ Limited Sep 16, 2011

    Ok, HERE 1 and HERE 2 are the vacuum
    diagram for both the 1970-80 V8 engines of various configurations.

    In these V8 diagrams, the vacuum line to the base of the carb on the
    manifold actually indicates ported vacuum, not manifold vacuum. Yes,
    it's confusing. Also, in these diagrams "10-20-40" and "10-25-45"
    indicate FSJ's, while "80" indicates a CJ. "E/CALIF" means "except
    California," while "CALIF" indicates a California-only model. "LHDC"
    indicates "less (without) heavy duty cooling" package, while "WHDC"
    indicates "with heavy duty cooling."


    Hope helps.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 ford ranger vacuum hose diagram


1999 Ford Ranger Vacuum hose diagram
Pamela, Normally vacuum line routing can be found under the hood of truck, on Rad support or on the underside of hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Ranger Engine Vacuum Hose Diagrams
Vacuum Lines The Ranger Station Forums
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com

Jun 12, 2016 | 1999 Ford Ranger SuperCab

1 Answer

Engine vacuum line diagram for 03 grand marquis 4.6


The vacuum line diagram is under the hood on the federal emissions decal. Any other vacuum related diagrams are in the Ford electrical and vacuum troubleshooting booklet. You can buy these used on eBay for less than $20.00 US

May 28, 2016 | 2003 Mercury Grand Marquis

1 Answer

I need the vacumn lines diagram for an 03 ford taurus wagon with a 3.0. 24 valve dohc v6 engine


All 2003 Ford vehicles were shipped with vacuum line routing diagrams printed on a sticker, which should be affixed inside your engine compartment. It is important that you use THAT diagram, as vacuum routing varies widely from vehicle to vehicle depending upon options and regional configuration.

May 22, 2015 | 2003 Ford Taurus

1 Answer

Find 2005 ford f 250 5.4 vacuum line diagram


The only diagram the manufacturer provides is for the AC system. There is a basic engine diagram on the emissions label under the hood.



25533392-uuob5xk5qpmufdktz2iyu4qm-3-0.gif

Mar 08, 2015 | 2005 Ford F 250 Super Duty

2 Answers

1986 FORD RANGER 2.9L 4WD VACUUM LINE DIAGRAM


I had the same need on an 87 firebird what I did was go to the junk yard find the same truck with same engine and trace the lines make my own diagram, and in my case buy the hard plastic formed vacuum lines that were broken. hope that helps

Aug 25, 2014 | 1986 Ford Ranger 2WD

1 Answer

Vacuume line diagram for 72 ford ltd with 400 small block


if the emissions tag is missing the autopatrs store may go back that far and print one out for you..if not try antique car websites..good luck..

Jan 27, 2013 | Ford LTD Cars & Trucks

1 Answer

Need vacum diagram for the 1967 ford ltd. Heater/air conditioner switch will not change from one to the other


If vacuum operated, you will have a single vacuum line from the engine through the firewall, and to the switch. From there, the vacuum will be routed to however many controls the vacuum operates-about 4 to 8, typically. First make sure the line to the switch has vacuum and has not been disconnected. If you have vacuum to the switch, check the little vacuum control canisters around the heater case for proper operation-the diaphragm in the canisters may be bad.
Sorry, I've never seen a diagram for the heater controls.

Nov 01, 2012 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,044 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...