Question about 2004 Chevrolet Venture Passanger
Change the hose connects from straight in to ones at 90 degrees
that should give you the required clearance
Posted on Aug 01, 2017
fasteddie383 is right. i had to do the same repair, to the same shock location, on my friend '81p/u. luckly i didn't have to take it to a welder, i just did it myself. as for making a patch, that's going too far, and isn't needed. i simply "vee'd" the cracks (on both the inside & outside of the frame) and filled in the cracks with the welder. after i ground the welds smooth-TAKE CARE NOT TO GO TOO THIN HERE!-i cleaned up the hole opening for the shock bolt and installed new shocks (which is what i was doing when i found the damage) and it's been mint ever since (this repair was done in July of 2003). good luck.
Posted on Feb 26, 2009
SOURCE: Venture van power door problem
It sounds as though one of the proximity sensors is faulty. Also try giving the tracks for the door a good shot of white spray lithium grease. The door may be binding enough so that the emergency reverse is kicking in.
Posted on Jul 30, 2009
Tips for a great answer:
Jun 27, 2016 | Cars & Trucks
Dec 22, 2012 | Cars & Trucks
Jul 08, 2017 | 2000 Chevrolet Venture
May 18, 2010 | 2004 Chevrolet Venture Passanger
May 14, 2010 | 2004 Chevrolet Venture Passanger
Apr 07, 2010 | Chevrolet Venture Cars & Trucks
Dec 30, 2009 | 2004 Hummer H2
Aug 03, 2009 | 2001 Chevrolet Venture
71 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: