I just replaced spark plugs on a 2007 nissan xterra. i have no acceleration responce. it will eventually gain speed but not rapidly.

HyeProfile

• 35 Answers

SOURCE: 2000 nissan xterra knock senor and plug 5

Change your oxygen sensor. They're due...

Posted on Aug 04, 2009

SOURCE: how to remove tail lamp for nissan xterra 2007 ?

Once you remove the bolts, you have to pull it straight back, but it takes a lot of force sometimes.

Posted on Aug 06, 2009

SOURCE: My 2007 Nissan Xterra won't start. When I try to

SEE IF SOME ONE CAN GIVE YOU A HOT SHOT YOUR BATTERY MAY BE WEAK AND THAT CLICKING NOISE IS THE SIGN OF NOT ENOUGH JUICE GETTING TO THE STARTER

Posted on Oct 12, 2009

Marvin

• 85239 Answers

SOURCE: service engine light comes on 2007 nissan xterra

Why my Check Engine/Service/Check Engines Soon light comes on?
The engine computer or PCM/ECM
All modern vehicles have a computer or the ECM (Electronic Control Module) that controls the operation of the vehicle powertrain (the engine and transmission). The main purpose of this is to keep the engine running at top efficiency with the lowest possible emissions. With constantly growing demands for better fuel economy and new strictest emission regulations it's not very easy to achieve. The engine parameters need to be constantly and precisely adjusted according to various conditions such as speed, load, engine temperature, gasoline quality, ambient air temperature, road conditions, etc. That's why today's cars have much more electronics than in early days - there is a large number of various sensors and other electronic devices that help the vehicle computer or ECM to precisely control the engine and transmission operation and monitor emissions.
The vehicle computer system has self-testing capability. When the computer senses that there is a problem with some of the components it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and your car needs to be looked at. To properly diagnose what is wrong, you need to take your car to a mechanic or a dealer. The technician at the dealership or a garage will then hook up the scanner to the car computer and retrieve the stored trouble code(s). Then he (she) will look it up in the service manual provided by a car manufacturer. The service manual contains the list of possible codes (about few hundreds) and describes what each code means and what needs to be tested. The code itself doesn't tell exactly what component is defective - it only indicates where to look, what engine parameter is out of normal range. The technician will have to perform further testing to pinpoint a defective part. THIS IS UNDER WARRANTY UNTIL 70,000 MILES OR 7 YEARS.

Posted on Nov 06, 2009

Dana Newcombe

• 1564 Answers

SOURCE: my 2007 Nissan Xterra doors locked on their own

Most likely you've got a timed lock programed into your menu parameters. You will have to go to your main vehicle instrumental menu and clear that option. This may have been inadvertantly done by one of the other operators of the vehicle.

Posted on Mar 05, 2010