Question about 2006 Infiniti FX35
I think you should go for manual first after that it would be easy for you to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here
2006 Infiniti FX35 FX45 Service Repair Workshop Manual INSTANT DOWNLOAD
Posted on Jan 29, 2018
I would take the car to almost any auto parts store and ask them to check the ODB II computer for codes and to reset the "Check engine light". Get the code that they tell you and it should go a long way to pointing you in the right direction to fixing this problem. It might also be that when you pumped the brakes that you somehow set a code in the computer from the ABS system and now that you have the brakes pumped up and working correctly resetting the Check engine light might fix your problem.
Good luck! Write back with any code you get and I'll see if I can help you figure out what the problem might be.
Posted on Jan 06, 2009
Check brake fluid level, add fluid from sealed container if needed.
Also check for leaking rear axle seals. Look for oil on the inside of rear wheels.
Posted on May 13, 2010
Replace the turn signal switch. Bad contact inside causing a crossing of the circuits. When the turn signal is applied it should open the brake light circuit allowing for just the signal to work. Doesn't sound like the switch is doing it's job.
Posted on May 23, 2010
Tips for a great answer:
Jul 18, 2014 | Nissan Pathfinder Cars & Trucks
See if the following information helpful:
1. Keep an eye on the dashboard for the indicators marked "SLIP" and "VDC Off" which will tell you the status of the computerized handling system if handling isn't normal. "SLIP" will blink when VDC is operating. "VDC OFF" means the system is off. Turn the VDC system back on if the Nissan's handling is poor by pressing the "VDC Off" button until the light goes out.
2. Adjust your driving if "SLIP" comes on. "SLIP" means the road conditions may be slippery. The VDC aids in steering and stopping, but be careful, even if VDC is engaged.
3. Remove any aftermarket suspension parts like enhanced shock absorbers if the "VDC Off" light comes on and handling is bad. The VDC system is geared for stock equipment and tires only. Use winter tires or snow chains on snow-covered roads. VDC won't substitute for the correct winter equipment.
4. Don't drive on very inclined corners with high banks and leave the VDC switch on if the handling is poor with VDC on. The system can't operate properly in that environment. Disengage VDC, or avoid those kinds of roads.
May 21, 2014 | 2004 Nissan Titan
May 19, 2010 | 2006 Nissan Pathfinder
May 06, 2010 | 2004 Nissan Titan
Sep 23, 2009 | 2003 Nissan 350Z
Jan 06, 2009 | 2004 Infiniti G35 Sport Coupe
Dec 21, 2008 | Infiniti G35 Cars & Trucks
249 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: