Thank you any way.
Turn the headloights on and see if the tail lights work, if not check the fuse inside at the left lower dash under the cover, check the fuse marked "tail", the tail lights are working then the problem may be the rheostat switch, make sure it's turned to the brightest setting, if the dash lites still don't work let me know.
Headlights work, taillights work, fuse is ok. In the dash, the turn signals work, but it is not illuminated where you can see the rpm and mph.
Have checked the dash light rheostat knob? It controls the brightness of the dash illumination lights make sure it's turned on.
Yea, we checked the rheostat knob - still nothing...
The next step would be to remove the switch and check to see if 12 volts are supplied to one of the wires, remove the switch with the knob from the dash,check to make sure it's connected, if so use a testlight or voltmeter and check for voltage coming in if there is voltage jumper the two terminals on the connector, the lights should turn on then. If that happens replace the rheostat switch.
Try all of the about and that did not work. By the way this a 1996 900s. Thank you
Unfortunately I can't be of anymore help with this without actually having the car do do some wire tracing and voltage tests, maybe someone else can post a solution for you.
2002 Isuzu Rodeo...dash lights and running lights will not come on. Fuze is blown and when I replace the fuze, it blows again. Brake lights are fine. Any ideas? Thanks Dennis
×
628 views
Usually answered in minutes!
×