Question about Buick Skylark

1 Answer

How to turn off inside (dome light) in 1992 buick skylark

Posted by mason_rosa on

Ad

1 Answer

MadMikeRS

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 743 Answers

The headlight switch will either have a rotory knob that dims and brightens the instrument lights. When the instruments lights are at their brightest, just past that the dome light will come on. Back that off just a bit (you should feel it click). If it has no rotary knob then its in the pull switch that turns the headlights on. Twist that knob counter clockwise.

If that is not the issue then there may be a door jamb switch that needs adjusting.
Open a door and push on the door jamb switch (usually located near the front of the door area by the hinges). If it still does not go off then try another door until you find the one that makes it go off.
Then, with some pliers, grab the button and gently pull out. The button is inside of a sleeve and that sleeve moves in and out of the part that screws into the body. When you close the door it will push the button and sleeve in as far as it needs to go.

then if that is not it there is a wire for the dome light grounding. The interior lights have constant power and it is the ground that opens and closes to turn the light on and off.

Posted on Aug 24, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the knock sensor on a 1992 Buick Skylark


Here's a link Jon to your knock sensor removal. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

1992 Buick Skylark 2.3L MFI SOHC Quad 4cyl

The Knock Sensor is located: Under hood, driver side, upper engine area, below exhaust manifold, mounted in engine block

Jul 18, 2015 | Buick Cars & Trucks

1 Answer

I own a 1997 buick skylark and the dome light stays on


Check 3 things;
  1. The Switch on the Dome Light itself
  2. The Light Dimmer Switch on the Dash
  3. The Door plunger switches
Any of these can make the light stay on.

Nov 14, 2014 | 1997 Buick Skylark

1 Answer

Error codes buick26


On the internet

Buick OBD 1 code 26

Replaced a tested & failed sensor?

You don't replace good parts for no reason

Aug 15, 2014 | 1992 Buick Skylark

1 Answer

What fuse controls trunk light inside light and glovebox light all stop working


generaly its the CIG or DOME fuse. using a test light,with key on,check all fuses inside the vehicle.

Dec 03, 2011 | 1994 Buick Skylark

1 Answer

WHERE IS THE THERMOSTAT LOCATED AT IN A 1992 BUICK SKYLARK?


Follow the upper radiator hose to the motor. It should be inside the part the hose connects to on the motor.

Aug 24, 2011 | 1992 Buick Skylark

1 Answer

How do I turn the inside ligts off in my 1992 buick skylark (dome light)


Take a close look at the picture below.
mustgo_85.jpg

This is the dimmer switch.
It's also control on / off function.
=======
In addition to this switch on the dashboard there are pin switch on each door.
Check and make sure all the pin switches are OK.

A damage pin switch will keep the dome light on.
If this is the case then remove the dome light bulb unit you has time to to repair the damage pin switch.

Aug 24, 2011 | 1992 Buick Skylark

1 Answer

I have a 1992 Buick skylark and the turn signals do not work it's the fuse i know that but witch one?


Your best bet if the fuses are not labeled on the fuse box edges would be to review your owners manual for a diagrahm...if no manual...salvage yard or on auto manuals is your best bet...Hope this helps...(If both side turn signals are lighting up but not flashing, you need to replace the flasher unit...under the drivers side dash)

Jan 27, 2011 | 1992 Buick Skylark

1 Answer

Inside cabin lights stay on


check the relay for the interior lights ... sounds like it is stuck on

Robert

Apr 21, 2009 | 1992 Buick Roadmaster

1 Answer

Flashers Won't work


The turn signal flasher is in a clip attached to the base of the steering column support inside the car. That would put it just about in front of your knees in the drivers seat, up under the bottom edge of the knee panel. I hope this helps you.

Nov 23, 2008 | 1992 Buick Skylark

3 Answers

92 buick skylark


you may try replacing the computer,i had the same problem with my buick last year. a new computer solved the problem.

Jul 20, 2008 | 1992 Buick Skylark

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...