Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

HOW DO I REPLACE THE HIGH PRESSURE LINE FOR A POWER STEERING UNIT ON A 1998 MUSTANG?

1 Answer

Anonymous

Master 4,803 Answers
Posted on Aug 20, 2011

Anonymous

Master

Joined: Oct 10, 2009

Answers

4803

Questions

Helped

2962345

Points

18833

Disconnect battery ground cable.
Remove engine Air Cleaner (ACL) .
Disconnect electrical connector in back of engine cooling fan motor.
Remove radiator fan shroud.
Disconnect constant control relay module harness from headlamp harness and place constant control relay module on top of engine to provide accessibility to power steering lines.
Remove wiring harness guide retaining screws and position guide aside.
Remove screw at power steering hose bracket.
Remove anti-rattle clip.
Remove plastic strap retaining tubes to power rack and pinion steering gear.
Remove power steering pressure hose at power steering pump.
Remove power steering pressure hose at power rack and pinion steering gear.
Remove power steering pressure hose from vehicle.
Reverse procedure to install new hose.
Fill and bleed power steering system.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

What's yr is s interchangable to a 2009 Toyota tundra

The Hose is here, but I notice you say 2009 AND 2002. It can't be both and they are different.

Power Steering Pressure Line Hose Assembly for Toyota ...

eBay https://www.ebay.ca > ... > Power Steering Hoses
Power Steering Pressure Line Hose Assembly for Toyota Tundra 2007 2008 2009-2019 ; Quantity. 10 sold. More than 10 available ; Item Number. 285044205082 ; Brand.
$58.45 · ‎ In stock

More here including OEM

2009

https://www.google.com/search?q=2009+Toyota+tundra+Power+steering+high+pressure+line

2002

https://www.google.com/search?q=2002+Toyota+tundra+Power+steering+high+pressure+line.

..

Read full answer

Mar 26, 2024 • Toyota Cars & Trucks

0helpful

1answer

Shudder in the power steering, replacaced pump and high pressure line, now what?

you have a loose preasure line ...that bolt you left out find it and put it back

Read full answer

Aug 16, 2012 • 1995 Ford Mustang GT

0helpful

1answer

Replace pressure house on 1985 mustang

For procedure to replace power steering hoses,click the link below :----http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-pressure.html
----------Also its advisable to go through this additional help links.Click the link to go through the procedures:----How to Remove Power steering Pressure Hose?

http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-power-steering-pressure.html

Vacuum hose Routing diagram?

http://repairhelpcenter.blogspot.com/2011/11/vacuum-hose-routing-diagram-for-acura.html

Ac line and evaporator drain hose?

http://repairhelpcenter.blogspot.com/2011/10/ac-line-and-evaporator-drain-hose-on.html

How to disconnect the hose form the Evap Canister?

http://schematicsdiagram.blogspot.com/2011/12/how-to-disconnect-hose-form-evap.html

Vacuum Hose Routing Diagram For Throttle Body?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html

How exactly the Vehicles A/C Hose works?

http://repairhelpcenter.blogspot.com/2011/11/how-exactly-vehicles-ac-hose-works.html

HOW TO REPLACE AN UPPER RADIATOR HOSE

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-upper-radiator-hose.html
HOW TO REPLACE A LOWER RADIATOR HOSE

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-lower-radiator-hose.html

Fail smog test due to gas filter hose?

http://repairhelpcenter.blogspot.com/2012/01/fail-smog-test-due-to-gas-filter-hose.html

EGR Hoses melting?

http://repairhelpcenter.blogspot.com/2011/12/egr-hoses-melting.html

EVAP connecting hose to PCV valve Collapse?

http://schematicsdiagram.blogspot.com/2012/01/evap-connecting-hose-to-pcv-valve.html

--------How to replace Power steering rack and pinion gear? http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-rack-and.html
--------How to replace Power Steering Pump?

Also bleeding:

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-power-steering-pump-on.html

----------------
How to replace Steering Linkage? http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-steering-linkage-on.html
-----Car steering wheel makes noise?

http://schematicsdiagram.blogspot.com/2011/12/car-steering-wheel-makes-noise.html

------
Car makes clicking or tapping sound? http://schematicsdiagram.blogspot.com/2011/12/car-makes-clicking-or-tapping-sound.html
---------This will help.Thanks.

Read full answer

Feb 16, 2012 • 1985 Ford Mustang

1helpful

1answer

Power steering tank wont hold fluid and leaks out beside driver tire

Sounds like a blown power steering line. To confirm, wipe down all surfaces around the power steering unit including the lines. Replace the power steering fluid and start the engine. While 1 person is inside the truck, have them turn the wheel from side to side while another watches the area around the power steering unit paying very close attention around the lines. The high pressure line is the most common cause for leaking fluid. If there's no crack or kink in the line, the issue may be the fitting itself where it connects to the power steering pump. Both parts are pricey but replacing the high pressure line (about $150 at the dealer) is certainly less expensive than replacing the whole power steering unit itself.

Read full answer

Jul 30, 2011 • 2004 Hyundai Santa Fe

0helpful

1answer

How to replace high pressure hose on a 1994 Silverado Chevrolet pick up truck.

hmmm..which high pressure hose the a/c or power steering hose...if its the a/c u need to take this to a service center. removing the high pressure hose without recovering the freon can cause serious injury.it is under extreme high pressure at all times even when the truck is not running... if its the power steering hose then start by removing the plastic shield in the steering staft at the steering box on the drivers side frame loosen the 18mm line nut then follow it to the other line nut on the back of the power steering pump....but sometimes the pump may need to be removed to to this, if this is the case i recommend u take it to a service center

Read full answer

Jul 12, 2011 • Chevrolet Silverado Cars & Trucks

0helpful

1answer

How to install a power steering high pressure line on a 1998 olds 88 regency

Hi,
You will need line wrenches to get the line off the steering gear assembly (tight in there near the frame sub assembly) First you will want to remove the drive belt from the power steering pump. Then remove the bolts from pump to bracket and lift pump up. On back of pump, remove low pressure line and drain fluid into a container. Under pump, remove high pressure line, and push it downward toward floor. From under car, follow the line to the steering gear, ( the line may have a keeper clamp or two for stationary support to remove along the way) then detach. Installation is reverse of disassembly........Not fun, but doable.....Mike

Read full answer

Jun 22, 2011 • 1998 Oldsmobile 88

1helpful

1answer

I have a 1998 Ford Windstar 3.8 and my power steering fluid is leaking out of one of the power steering lines that run down the back of the engine. The question is.....how the heck do you get at this...

It's recommended to replace the low pressure return line that goes to the back of the engine area, to take it to a garage because the vehicle must be lifted high enough to work on it safely and easily.

Read full answer

Feb 13, 2011 • 1998 Ford Windstar

4helpful

2answers

How do I change the orifice tube on a 1998 Ford Mustang base model?

THE SMALLER LINE GOES TO THE EVAPORATOR, i HAVE CHECKED WITH MY FRIEND AT FORD ON THIS PROBLEM AND HE SAID U HAVE TO REPLACE THE SMALLER AC LINE (HI PRESSURE LINE, THE ORIFICE TUBE IS PART OF THE HIGH PRESSURE LINE, HERE IS THE PART NUMBER FROM A SITE CALLED ROCKAUTO.COM
MOTORCRAFT Part # YF2227 {#F6ZH19N651AD, F6ZZ19835A}
factory installed AC High pressure refridgerant line.

Read full answer

Jun 04, 2010 • 1998 Ford Mustang

0helpful

1answer

Power steering pump leak

Usually it is the high pressure line. They have compressed fittings, and over time they begin to leak, due to the high pressure.

Read full answer

Mar 16, 2010 • 1998 Chevrolet Venture Cargo

2helpful

1answer

Subaru impreza 1993 power steering leak

YOU CANT USE A REGULAR FUEL LINE ON POWER STEERING AS A HIGH PRESSURE HOSE.BECAUSE POWER STEERING PRESSURE IS 1000 PSI.YOU HAVE TO BUY THE POWER STEERING HIGH PRESSURE HOSE IT HAS NUMBER OF PLIES MATERIAL WEAVES TO MAKE IT STRONG.IT WAS MADE FOR POWER STEERING HIGH PRESSURE.YOU DONT HAVE A BLOCKAGE .THE HIGH PRESSURE HOSE JUST WORE OUT.REPLACE IT .IT SHOULD FIX THE PROBLEM.

Read full answer

Sep 04, 2009 • 1993 Subaru Impreza

Not finding what you are looking for?

View Most Popular

Cars & Trucks

What's yr is s interchangable to a 2009 Toyota tundra

Toyota Cars & Trucks

734 views

Ask a Question

Usually answered in minutes!

Related Topics:

Trustworthy Expert Solutions

HOW DO I REPLACE THE HIGH PRESSURE LINE FOR A POWER STEERING UNIT ON A 1998 MUSTANG?

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

What's yr is s interchangable to a 2009 Toyota tundra

Power Steering Pressure Line Hose Assembly for Toyota ...

Shudder in the power steering, replacaced pump and high pressure line, now what?

Replace pressure house on 1985 mustang

Power steering tank wont hold fluid and leaks out beside driver tire

How to replace high pressure hose on a 1994 Silverado Chevrolet pick up truck.

How to install a power steering high pressure line on a 1998 olds 88 regency

I have a 1998 Ford Windstar 3.8 and my power steering fluid is leaking out of one of the power steering lines that run down the back of the engine. The question is.....how the heck do you get at this...

How do I change the orifice tube on a 1998 Ford Mustang base model?

Power steering pump leak

Subaru impreza 1993 power steering leak

Not finding what you are looking for?

Cars & Trucks

What's yr is s interchangable to a 2009 Toyota tundra

Ask a Question

Check Out the Latest Top Trucks Report!

Top Ford Experts

ZJ Limited

Thomas Perkins

xxxxxx xxx

Are you a Ford Expert? Answer questions, earn points and help others

Manuals & User Guides

Http://www.caaquebec.com/DocumentLibra...

Http://www.grahamford.com/images/broch...

Http://www.autodealertools.com/quickQu...

Related Topics:

Trustworthy Expert Solutions

HOW DO I REPLACE THE HIGH PRESSURE LINE FOR A POWER STEERING UNIT ON A 1998 MUSTANG?

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

What's yr is s interchangable to a 2009 Toyota tundra

Power Steering Pressure Line Hose Assembly for Toyota ...

Shudder in the power steering, replacaced pump and high pressure line, now what?

Replace pressure house on 1985 mustang

Power steering tank wont hold fluid and leaks out beside driver tire

How to replace high pressure hose on a 1994 Silverado Chevrolet pick up truck.

How to install a power steering high pressure line on a 1998 olds 88 regency

I have a 1998 Ford Windstar 3.8 and my power steering fluid is leaking out of one of the power steering lines that run down the back of the engine. The question is.....how the heck do you get at this...

How do I change the orifice tube on a 1998 Ford Mustang base model?

Power steering pump leak

Subaru impreza 1993 power steering leak

Not finding what you are looking for?

Cars & Trucks

What's yr is s interchangable to a 2009 Toyota tundra

Ask a Question

Popular Questions

My seat belt alarm keeps dinging even though my seat belt is secured/fastened. how do I make it stop?

Shaker 500 stereo

A diagram of a 2003 Ford Mustang interior fuse box?

I need a fuse box diagram for a 2008 ford mustang

Firing order diagram for a 289 motor

Check Out the Latest Top Trucks Report!

Top Ford Experts

ZJ Limited

Thomas Perkins

xxxxxx xxx

Are you a Ford Expert? Answer questions, earn points and help others

Manuals & User Guides

Http://www.caaquebec.com/DocumentLibra...

Http://www.grahamford.com/images/broch...

Http://www.autodealertools.com/quickQu...