There are 2 possible diagrams for your car depending on which engine it has. Both diagrams are listed below:
1999 Chevy Malibu 2.4L
1999 Chevy Malibu 3.1L
SOURCE: 2000 chevy malibu serpentine belt routing
Here's a link to the routing diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S8015
SOURCE: serpentine belt diagram for 2003 chevy impala
send an email to [email protected] and I will send the diagram to you
SOURCE: 99 Beetle Serpentine belt diagram
The serpentine belt on my 2001 Beetle loops around the outside of the large pulley closest to the firewall, at the bottom, then goes around the outside of the forward lower pulley, then crosses to the inside of the one right above the forward lower pulley, then loops over the outside of the alternator pulley at the top front side, then goes inside under the tensioner pulley, and back down to the outside of the big rear pulley.
I hope that description makes sense. A picture would work a lot better, but I don't have an easy way to post it. Also, I know you asked about the '99 Beetle, but I assume its routing is the same as the 2001 (which is the one I have).
SOURCE: Diagram of Serpentine Belt 1998 Chevy Cavalier
diagram should be on the radiator shroud / top of radiator
3,750 views
Usually answered in minutes!
×