At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If there is no mobile phone Paired to the
vehicle system and the SIG screen is
displayed, Pairing may be performed as
follows:
Select Phone Mode (if not already
selected).
Use touch-screen keypad to enter the
following digit sequence and press the
Send/End button.
The following sequence performs exactly
the same function, but times-out after
approximately five minutes, ##1#*#.
(If you are not familiar with the Pairing
process, this sequence is NOT
Recommended, because of the time-out
period.)
At the SIG**** screen the vehicle system
is waiting for communication with a
Bluetooth equipped telephone.
Check that your mobile phone is set to the
Jaguar Bluetooth system, using the menu
functions on the phone. Refer to the
handbook that was supplied with your
specific mobile phone.
When Jaguar device is found on the
mobile phone display, the phone will
prompt you to enter the pass key (1313)
on the mobile phone keypad.
When the above operation has been
completed and the phone is successfully
Paired and connected with the vehicle
system, the SIG* screen will be displayed.
S.Y.
as long as you have a compatable phone (consult your dealer for confirmation) make you bluetooth active on your mobile, then in pcm/phone settings search for phones. when it locates your phone it will ask for a code to input. type this into your phone and it should pair via bluetooth. you are now ready to make and receive calls via your pcm
If I remember rightly doesn't the Jaguar system give you a code you have to type into your BB? I run an earlier model than yours, but when I get a loaner, I seem to remember that you have to do this. So, go to pairing mode, get the code and tap that into the BB when it asks for the code. I have had no problem pairing my BB with any of the new Jags from X type, S type and XJ.
OK - If you are getting the SIG instead of Phone connected in the X Type - You need to enter the code - for the 2007 X Type, the Code is ##3#*# - Which should then say waiting and finally SIG ****** which means it is connectable - To pair your phone, goto bluetooth and pair device, wait until the Jaguar is found. When prompted for the numerical code it is 1313
×