At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I do have a 1995 2.6e Cabriolet and it have multiple problems .Abs light stay on .airbag light stay on, and has a red light flasing .can not find workshop manual for the car please help
Re: I do have a 1995 2.6e Cabriolet and it have multiple...
My ABS light was on for a couple of months until I discovered that it was due to a wrongfully installed brake-light light bulb. Might be worth checking out.
Re: I do have a 1995 2.6e Cabriolet and it have multiple...
Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://answers.yahoo.com/question/index?qid... Jul 12, 2014 - My battery light stays on sometimes it might blink on and off. But the problem is i can be driving my car and my airbag light and abs light will ...
www.civinfo.com > ... > Bugs, faults and irritations Feb 12, 2012 - 18 posts - 5 authors
Airbag light. ABS ALSO - the speedometer, rev counter and engine temp ... 30 mins driving (apart from engine management light which stays on). ... I have ruled out problems with the alternator and the relays - they're all fine.
? 4:14 www.youtube.com/watch?v=tIBjIr9a42w Feb 6, 2010 - Uploaded by vehix411
airbag abs srs light diagnose without a scanner air bag ... Alsowhen I tried the scan plugging the paper ...
These lights being on indicate you have an ABS and Airbag problem.When any of these lights are on the relevant systems are inactive.you will have to have the codes read using a scan tool.The problems fixed and the codes erased.
Possible that the connectors to the dash board display or ground connectiion is faulty as if one of the lights are ON then it can be related to the fault of the unit be it the ABS or the airbag. Check the under on the car for any damage to the harness to the sensors , the ABS to the wheels.
its unfortunate but u are not able to.
Your vehicle has multiple computers controlling all the electrics.
When a warning light comes on such as your airbag light or an engine light it is usually because of a fault.
if there is a fault and you ignore it and just cancel the light, then in an accident the airbag might not deploy. which would not be a good end result.
i would take it to a mechanic who has a scan tool to find the code that is causing your airbag light to come on, then fix the issue.
this will solve your airbag light problem and keep you safe on the roads as well.
By disconnecting the sensor the light will still stay on unfortunately. The light has come on in fact due to either a false contact normally with the connector under the seat (common problem) or an actual fault with the airbag itself. By disconnecting it, it will only record the fault in the MRS (Multiple Restraint System) to have occured an additional time.
The only way to clear an airbag fault, is to plug in a reader and clear the fault. However this is a vicious circle because if the airbag system isnt problem free, the light wont extinguish! It was designed so cars were forced to go to the garages with such problems as they are a high risk problem, as any joe could just disconnect the airbags and sell it to an unsuspecting victim knowing its unsafe etc etc!
×