Change Oil and Filter Light Comes On.

Place a piece of black electrical tape over it ,problem solved .you know the oil is good

According to Nissan owners club online - - -
There are 2 square buttons on the dash, to the left of the steering wheel. Push the left one to get to the maintenance screen and push the right one to change the "oil", "oil filter", or tire schedules. Don't worry about "other".
To reset, highlight the number and just hit "back", to reset it automatically. It takes a while but you'll figure it out.

To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.

Hi, I'm a DIY guy, but I don't know how to reset the oil maintenance light that came ON on my 2010 Altima. I had it service at the dealer and won't tell me how to reset it. Thanks