Pontiac G6 - Recent Questions, Troubleshooting & Support

Question edited for a lot more clarity. That is the worst written English and spelling I have seen for months! :>D Question moved to model category. It sounds like you are in Limp Mode. Was the crankshaft sensor, a proper OEM replacement of a cheap one from Mexico or China? They come faulty as new! Don't go cheap on sensors. https://www.google.com/search?q=2008+pontiac+g6+limp+mode Or it has a rev limiter depending on what you are doing. https://www.google.com/search?q=2008+Pontiac+G6.+I+can%27t+get+it+to+rev+over+4000+rpm ..

The fuel composition sensor goes by several other names: flex fuel sensor, fuel compensation sensor, and variable fuel sensor. Its exact location varies according to the vehicle's make and model, but you can usually find it in the fuel line that connects the fuel tank and the injectors This for flex fuel models not sure Pontiac had it.

Question edited for a lot more clarity. Question moved to model category. It is a known issue on that model. Check out the forums. https://www.google.com/search?q=2006+Pontiac+G6.+It+is+stuck+in+park ..

Question edited for clarity and toss in some CAPS. https://www.google.com/search?q=2009+Pontiac+G6+GT+fuel+regulator+location

Fuel pump flow control module 2009 Pontiac G6 3.5l GT

FreeAutoMechanic https://www.freeautomechanic.com > ... > Car Questions Aug 24, 2019 - The fuel pressure regulator is mounted on the fuel sender assembly. Fuel Pressure Testing. Connect a fuel pressure gauge; Turn ignition on with ... ..

Are you going to take it apart and play inside it. This is a job for a professional auto electrician. there are two 'computers'. https://www.google.com/search?q=2010+Pontiac+G6+ECM+Location ..

You probably got it fixed by now but ... https://www.google.com/search?q=mobile+auto+electrician+near+me Professional diagnosis by scan tool computer. ..

This errod codes refer to Powertrain: P0-P3:
- P0XXX: Generic DTCs
- P1XXX: Manufacturer Specific DTCs
- P2XXX: Generic DTCs
- P3XXX: Generic DTCs and Manufacturer Specific DTCs

P0120
Throttle/Pedal Position Sensor/Switch A Circuit Malfunction

P0220
Throttle/Pedal Position Sensor/Switch B Circuit Malfunction

P1516
Throttle Actuator Control (TAC) Module Throttle Actuator Position Performance

P2101
Throttle Actuator "A" Control Motor Circuit Range/Performance

Took the Throttle body off, cleaned it (looks like new!!) real good and then I checked the Module on the side of it for moisture and the connection!!! Put every thing back together,and so far every thing is good ( no check engine light- no Reduced Engine Power mode.

I hope helps with this.

check the oil and coolant levels. if coolant is low pull the sparkplugs and try to turn the engine over if still not turning free remove the serpentine belt and try again, if it turns over ok check the pullyes on the front of the motor to see if they all turn free by hand. a serpentine belt can prevent an engine from turning over if a tensioner, idler, water pump, alternator, or power steering pump is siezed up or starting to seize. being your battery is bad I'm thinking probably the alternator is seized. hope this helps mike.

The is for a Grand Prix, but it explains that modern cars don't have a flasher relay. The flashing is a function of the Body Control Module (BCM). https://www.2carpros.com/questions/where-is-turn-signal-relay-for-lrft-turn-signal-and They just sold you a generic relay. https://www.google.com/search?q=2007+Pontiac+G6.+turn+signal+relay+location ..

on the HVAC housing behind the glove box.

The fuel pressure regulator is mounted on the fuel sender assembly. It is built into the same assembly as the fuel pump.

Question edited for clarity and add some CAPS.Question moved to model category.In this link and also videos on replacing the serpentine belt on the G6.https://www.google.com/search?q=2006+pontiac+g6+serpentine+belt+diagram.

Check the stabilizer links. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com! I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

You fell into the "Let's try replacing this" method of car repair Gina. It doesn't work and is expensive. A pro grade bi-directional scan tool computer can diagnose faulty solenoids by instructing them to operate and verify that they have. The Odometer display is instructed by the ECM which also talks to the Transmission Control Module. You have a computer issue not a mechanical issue. https://www.google.com/search?q=auto+electrician+near+me The Mobile Services will come to you. ..

I always buy a service manual from advance or some parts supplier for every vehicle I own, that way the manual tells me how the parts are mounted to the motor and their location to the rest of the motor. I am not sure where the starter is located on a Pontiac G6 but look above it if you have to use a flashlight, if your oil filter is near it, make sure it is tight and not loose. Sometimes valve pan gaskets leak and run down the side of motor making us believe oil is coming from another place, just start looking and you will find it.

Pontiac G6 Transmission Cooler Line Assembly - AutoZone

https://www.autozone.com > drivetrain > pontiac > g6 Results 1 - 9 of 9 - Order Pontiac G6 Transmission Cooler Line Assembly online today. Free Same Day Store Pickup. Check out free battery charging and engine ...

HOW-TO replace transmission cooler lines (2007 G6 3.5L ...

https://www.g6ownersclub.com > ... > HOW-TO Feb 4, 2016 - 1. Remove the lower engine splash shield under the radiator. It's held on by 4 plastic clips and 5 screws. 2. Remove the nut securing the cooler ...

it is located on the passengerside under the altenator closest to the firewall. make sure the vehicle is turned off reach in under the altenator and you should feel the cap.

Question edited for clarity. Question moved to model category. Did you clear the codes? Have you disconnected the battery just before it wouldn't start?

P0353 OBD-II Trouble Code: Ignition Coil C Primary ...

https://www.yourmechanic.com > Articles P0353 means a malfunction has been found specifically in ignition coil C. Problems may include broken connector locks and loose connection at coil. Missing: G6 ‎' Must include: G6

• P0355 OBD-II Trouble Code: Ignition Coil B Primary ...

  https://www.yourmechanic.com > Articles Trouble code P0355 means the PCM has identified an electrical malfunction in the primary or secondary circuit of ignition coil B.

P0315 Code: Crankshaft Position System Variation Not Learned

https://www.carparts.com > blog > p0315-code-cranksh... Sep 15, 2022 - Diagnostic trouble code (DTC) P0315 stands for "Crankshaft Position System Variation Not Learned." The crankshaft position sensor measures the ...

Sound like something has fallen into the motor (small tree branch,pencil,etc. Remove heater motor .Be carfull.You might find something unexpected!

Question edited for clarity, add maker and typos. Question moved to model category. It sounds like you are confused what 'cranking' is? Cranking just means turning over. In the old days cars were started using a cranked handle with a spigot that was latched onto the crankshaft and turned by hand. After the cranking, the engine should start or fire. You either have a faulty Fuel Pump Relay, or a faulty pump. Both can be tested. https://www.google.com/search?q=2010+pontiac+g6+fuel+pump+relay+location ..