20 Most Recent 1996 Toyota Tercel - Page 3 Questions & Answers

You just put it on and rotate it until the bolt holes line up and then torque the bolts in an "X" pattern to 45 foot pounds.

do you have the repair manual because it will be in there if not call the parts store and ask

HI LOZANO. I AM ALMOST 100% SURE YOUR PROBLEM IS A DEFECTIVE BRAKE LAMP SWITCH. GET SOMEONE TO STAND BEHIND THE CAR WHILE U DEPRESS THE BRAKE. IF NO BRAKE LAMPS PRESENT THAT IS YOUR PROBLEM. ANY LOCAL PART STORE SHOULD HAVE IT FOR 15-30 BUCKS. ITS LOCATED UNDERNEATH THE BRAKE PEDAL

IF SHIFTER IS MOVING CHECK MANUAL VALVE

You will need a window crank removal tool to get the crank off. There is a clip on or behind the handle that the tool helps you expand to remove the crank. It's usually available at most auto parts stores for under $10.

http://www.napaonline.com/Catalog/Result.aspx?N=30932This is the NAPA auto part page listing the relay that you need.

Did you change you tire's?If you change the tire size it will make spedo read wrong.

check for signal getting to coil with a l.e.d test light the coil should have 12v pos going into it and the neg side should pulse when the motor is cranked. if no input is there check c.s.p sensor.

depends on which motor, But a simple way to find them is follow the positive battery cable away from the battery , It leads right to it,, On a 1990 its behind the motor (2.0) facing the car from the front, on the drivers side