20 Most Recent
- Page 3 Questions & Answers
Toyota camry 1996 window winder how do i remove it
there is a special flat tool ( available from auto parts and tool shops )
put it between the hub of the handle and the trim that protects the door trim and push it towards the knob of the handle
there is a small "C" shaped clip that fits in a groove in the handle and by pushing it out , the handle will slip of the splines
on Feb 19, 2016
Transmission shift is locked engine won't turnover
Hi there my name is Brandon and Im a electronic n mechanical engineering technician mechanic!! I am the man regular mechanics call when they can not find out or fix a problem I will help you n tell you step by step what to do sounds like natural safety switch I need more information to help more
Thank you God bless you,
Your engineering technician
Ps if you how any questions you can email me and I will get back to you asap
on Feb 11, 2016
Radio/CD player Wiring
Here are the correct factory radio wire colors with definitions.
Car Radio Battery Constant 12v+ Wire: Blue/Yellow
Car Radio Accessory Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: Black/Red
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 6 1/2′
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Purple
Right Front Speaker Positive Wire (+): Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: 6 1/2′
Car Audio Rear Speakers Location: Side Panels
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White
on Nov 29, 2015
P0401 Error, Insufficient EGR Flow
In my case this was caused by a bad hose from the Throttle Body to the EGR Vacuum Switching Valve. Pictures are taken from the left side of the car except for the picture of the original hose. This is with the 4 cylinder engine. I used a piece of fuel/vacuum line that I had. It fit snugly which made my cost of repair zero.
This is the end of the original hose with the crack plainly visible.
Hose run from the throttle to the VSV
Replacement hose at throttle (far right). This is where it was cracked.
Replacement hose (far right) on the VSV.
on Oct 30, 2015 | 1996 Toyota Camry
Not finding what you are looking for?