1988 Toyota Corolla 4 Door - Answered Questions & Fixed issues
How to replace fuel pump ae95
Check to see if the fuel pump is mounted inside the tank if so you have to remove the tank to replace it some cars have it under the back seat where you can access the top of the fuel tank where the pump is located good luck
1/30/2018 3:59:08 AM •
1988 Toyota...
•
Answered
on Jan 30, 2018
•
146 views
My car wont change to 5th ger
front wheel drive type AE 90 series
common problem
possibles
is this a cables shift ..see if the cables can be adjusted at the box
take the cables off the box and check the stick has full movement
to the fifth gear position
check the engine mounts
if the clutch was recently changed I would suspect that
box has to come out for the next repair /inspection
the syncro of the fifth gear is damaged
the rolled steel pins at the internal selectors has bent or broken
option
try to source another good second hand box and fit that
3/19/2015 11:59:40 PM •
1988 Toyota...
•
Answered
on Mar 19, 2015
•
275 views
Car will only engage into a gear when car is off. the clutch feels like it's doing nothing and won't shift when engines on.
If your car has a hydrolytic clutch it uses a fluid to transfere the pressure you apply to the pedal to operate the clutch mechanism between engine and the transmission. If you have a leak in the system your clutch system will loose its ability to operate. Often the leak is actually inside the chambers of the master cylinder ( pump you operate when pushing the pedal ) so it's internal so you may not actually see dripping fluid under the car. If the part that does the clutch movement ( called the slave cylinder ) is leaking you my see guild under the car or dripping from the area of the clutch. Check your clutch fluid resevor and see if it's low. If it is fill it with the recommended fluid and see if the function returns. If it does have the system checked for leaks before it leaves you stranded some place more problematic than your home.
12/17/2014 5:33:12 AM •
1988 Toyota...
•
Answered
on Dec 17, 2014
•
215 views
How do I install the distributor on a Toyota Corolla 1988?
WOW I just sent you the directions, ,your right on, good for you !!!you can do it your way but theres a chance you may be 180 deg out, did you bring motor to TDC before you started the work, if you did .you 'll be ok if not it wont start or run VERY badly.
9/25/2014 7:30:47 AM •
1988 Toyota...
•
Answered
on Sep 25, 2014
•
360 views
Where can I get a manual for a 1988 corolla ?
If your willing to spend some money for the imformation toyota has a tech site for vehicles 1990 and and older that you can subscribe to for 2days or a yearly if that suites you. Or autozone or similar stores sell how to books like Hayes for about $20
9/10/2014 12:11:23 AM •
1988 Toyota...
•
Answered
on Sep 10, 2014
•
123 views
Overheat
hi there. does the engine slow down and labour when it over heats.sounds like the head gasket is in need of replacing...or the ignitine timing is retarded. good luck
4/26/2014 6:49:51 PM •
1988 Toyota...
•
Answered
on Apr 26, 2014
•
165 views
Not finding what you are looking for?