1983 Peugeot 604 - Page 5 - Answered Questions & Fixed issues

CODE MEANS WHATOBD2, SCAN CODE ERROR FOR A/T TRANNNY?OR MEAN THE FULL PEUGEOT, MODEL NUMBER CODETELL WHAT''S UP FIRSTWHAT ARE YOU DOING AND WHY?THE DEALER IN YOUR TOWN CAN DECODE THE VIN #AND TELL YOU WHAT TRANSMISSION IS THERE.AHHH DOUBLE POSTEDI'm looking for my gearbox code for replacement //MANUAL OR AUTOMATIC?MOST BOXES AUTOMATIC HAVE TAG ON THE SIDE WITH FILL MODEL TOLDAND THE DEALER KNOWS FOR SURE ASK THEM.YOU TELL THEM THE VIN AND MAGIC HAPPENS.THE AUTOMATIC IS THE MOST HARD.IT HAS LOTS OF MODELS. AND SUBMODELSTO GET THE CORRECT BOX WITH CORRECT GEAR RATIOS.OR THE PCM (TCM) WILL NOT LIKE IT AT ALLALL FACTS ON THE BOX MATTER, NOT JUST FIT.

NO YEAR CAR TOLD (FAIL) NO ENGINE TOLD (FAIL 2) NO COUNTRY TOLD ,AS SOME SMOG DEVICES CAN FAIL. SORRY WE DON'T MAKE CARS, WE ONLY CAN STATE THE "CAPTAIN OBVIOUS" ANSWERS AND THIS CASE IMPOSSIBLE A CRANKS FAST BUT WILL NOT START HAS 50 CAUSES, I HAVE A LIST. BUT IS FRANKLY SILLY TO POST IT../ WE DO UP TO20 TESTS USING 10 TOOLS TO FIND IT. GUE$$ing is crazy wrong. (after a real tuneup done) NOT EVEN TOLD IF IT GAS (PETROL) OR DIESEL OR HYBRID OR RUNS ON LNG, LPG. OR ? ETHANOL E85 OR E100? fuels. THE VIN # ON THE CAR SOLVES THIS RIDDLE,

If the anti-pollution light on your Peugeot 207 VTi is on, it usually indicates a problem with the vehicle's emission control system. This light may appear in different ways, depending on the model and year of your vehicle, but it usually looks like a picture of an engine with "check" written on it. Here are some steps you can take to address this issue:

1. Check the gas cap: A loose or damaged gas cap can cause the anti-pollution light to come on. Make sure the gas cap is tightened securely and that it is not damaged.
2. Check the oxygen sensor: The oxygen sensor is responsible for monitoring the level of oxygen in the exhaust and adjusting the fuel-to-air ratio. If the sensor is damaged or malfunctioning, it can cause the anti-pollution light to come on. A qualified technician can diagnose and repair the sensor.
3. Check the catalytic converter: The catalytic converter is responsible for converting harmful pollutants into less harmful gases. If the converter is damaged or malfunctioning, it can cause the anti-pollution light to come on. A qualified technician can diagnose and repair the converter.
4. Check the air filter: A dirty or clogged air filter can cause the engine to run rich, which can lead to increased emissions and the anti-pollution light to come on. Replace the air filter if necessary.

If none of these steps solve the problem, it is best to consult a qualified mechanic to diagnose and repair the issue

The Peugeot 504 XS produced in 1994 came with a range of engine options, including a 2.0-liter inline-four gasoline engine with a maximum power output of 120 horsepower (88 kW) and a 2.3-liter inline-four diesel engine with a maximum power output of 71 horsepower (52 kW). It's important to note that the engine power may vary depending on the specific model and region where the car was sold.

"took out the radio cassette player and replaced with a rd3 cd player, "the whole head end was replace not some simple added CD player, it seems.MAKER OF RD3 IS WHAT? it has real maker and real model on the top tag.get that first and next get the manual for it.to learn what it needs and what beeps meant to, and installer needs.is this radio head from another car? A Peugeot or ? what?examplesCar radio with CD RD3-1-Citro?n C5 I 96489098ZEPeugeot 307 car stereo CD player Peugeot RD3 radio Autoradio CD Siemens VDO Peugeot 206 206+ 307 / Citroen C2 - C3 - RD3-01my guess is the RD3 came out of an older Peugeot and is an OEM Peugeot , RD3 head end.and does not like your older? (not told) car,so the answer is ask Peugeot for help. and bet all tags the radio show Peugeot and Cietroen.no car told just 207>?, no car year told and no clear radio head end told (exactly)post all tags on the radio.RDS IS FOR THE RADIO. MEANS FM radio data option. so turn off RDS if not using that feature.if working on a French car, why not ask on their forum.https://frenchcarforum.co.uk/forum/viewtopic.php?t=37185

not told at all a problem Reverse dead. low (PRNDL) dead Drive dead, or will not upshift at all stuck in 1st gear? tell all evidences. check all fuses first then scan the OBD2 port for DTC errors. let me guess in EUrope and no obd2 until 2007 diesel. the TCM needs to be scanned none the less. or buy the service manual and read how.? no car like this in USA so we;'d first learn the real boxes maker and name. then see if it has shift solenoids. and if it has 1 to 3 speed sensors on the box. you said gear box. but we have 2 kinds, manual box or auto the manual box on ours. has vss electric sensor only ABS sends speed data to the PCM. learn what gear box is here and tell it or answers will be dead wrong or wild guessing. and we have no Peugeot here.USA. lots of cars In Europe are in fact stick shift manual./ super common there, I know.

To reset the TPMS light on a Peugeot 3008 from 2010, you will need to follow these steps: Turn on the ignition without starting the engine. Press and hold the lock and unlock buttons on the remote key for five seconds until the car locks and unlocks. Wait for two minutes or drive at a speed of 20 km/h or more for about five minutes until the system automatically recalibrates itself. If the light does not turn off, check the tire pressure on all four tires and make sure they are inflated to the recommended pressure. If the pressure is correct and the light still won't turn off, you may need to take your vehicle to a professional mechanic or Peugeot dealership to have the TPMS system diagnosed and repaired.

it could be an indication of a problem with the turbo system. The sound you are hearing could be from a turbo wastegate, which controls the amount of exhaust gases that enter the turbocharger and can make a sound similar to a blow-off valve.

The camshaft position sensor on a Peugeot 3008 can be located in different positions depending on the engine model and year of manufacture. Here are the possible locations:

1. On the engine cylinder head: In some Peugeot 3008 models, the camshaft position sensor is mounted on the engine cylinder head, near the camshaft.
2. Near the timing belt cover: In some other models, the camshaft position sensor is located near the timing belt cover. It can be either on the engine block or on the cylinder head.
3. Behind the camshaft pulley: In some Peugeot 3008 models, the camshaft position sensor is located behind the camshaft pulley.

To locate the camshaft position sensor on your specific Peugeot 3008 model, you should consult your owner's manual or a repair manual for your vehicle. Alternatively, you can seek the assistance of a professional mechanic or a Peugeot dealer.

No VIN# told (sad) no country told sorry those cars are not the same all over earth ever. ! and it doesn't turn off>, huh? IF the CEL is dead key on the lamp is dead or was hacked by the last seller, (common) key on is lamp self testing .and its only purpose that.and must GLOW. but lost your scan tool to see errors (DTC) the CEL lamp is useless to any tech (if not glowing) CEL is for 1 thing , smog passes. a tech knows there can be 1000 errors and only some do make CEL glow, forget this silly lamp ! okay end it. wiser is scan the PCM as any car misfires. keeps hesitating is misfiring or is lean burn. or flooding misfire. top causes no a guess. 1:low fuel pressure. (a test) FPR bad. 2: TPS is bad or TWB 3: gee running spark plugs for 17 years? no why 4: engine compression way too low (any) a test. 5: EGR stuck open (if has one) 6: MAP dirty clean it.( so it is new sure) but gee the vacuum path to it must not be BLOCKED. 7: maf sensor dirty. 8:ect tells PCM engine hot (lies) and cold ,it's bad. 9: if engine does have MAF does it< and vacuum leaks are huge , the AFR goes lean and does as you said. map only engines, vacuum leaks engine screams with full power, some EFI run map for starting and idle only then kicks over to MAF for off idle to WOT. best is can do , no such car in USA no books either. buy the service manual and read what is there. and not there is the key fixing EFI problems. if are. is car in EUROPE? if yes why fear this fact as 99^% do here. all that does is undermine correct answers in Europe OBD2 is good 2002 up petrol engines. scan it and save tons of Euro's the tool is free,(math) just one hour of shop labor saved makes it free !!! called ROI ECON101 or the first part not guessed and useless to the problem.at hand. free, or worse the guessed part is wrong or bad and now 2 problems. scan it and win.

If the sat nav is not responding to touch on the touch screen of your Peugeot 207 Sportium, there are a few things you can try: Check if the screen is clean: Sometimes, the touch screen may not work if there is dirt or debris on it. Use a clean and soft cloth to wipe the screen. Restart the system: Try restarting the sat nav system by turning off the car and turning it back on again. Check the settings: Check if the touch screen settings are correct. In some cases, the touch screen may be turned off in the settings, so make sure it is turned on. Update the software: If the sat nav software is outdated, it may not work properly. Check for any available updates and install them. If none of these steps work, it may be a hardware issue and you may need to take the car to a mechanic or Peugeot dealer to diagnose and fix the problem.

Not usually a fix, it is a replacement. https://www.google.com/search?q=Peugeot+Partner+exterior+temperature+sensor ..

tell what fails first, Backup lamps rear dead? (reverse lamps)??? well that is a wire to the lamps or can shift cable. from shifter to tranny no VIN told for car, so answer are super hard lacking VIN (also shows country and engine there) best is guy a service manual for your VIN and country none sold here USA> sorry after 2015 none.

fuses good scan it yet

weak batteries cars came new with 2 fobs good, both fail.? never have just one, they wear out too. and fast.! or even worse button switches inside shorted. omg pain. that is just one cause, of many, scan the OBD2 port PCM for errors yet?

no VIN TOLD , AT ALL PARTS ARE SOLD BY VIN. and BOOKS ON CARS ARE SOLD BY YEAR AND VIN NON TOLD. cam timing or spark.??? sold new with 15 engine, (vast) and no clues you. 2007 to now made and not told at all no job told at all or what steps are stuck at during re-assembly, not told at all. we cant see you,ok?

You can get this Blaupunkt radio code for £5 from this link: https://www.vivastreet.co.uk/car-parts/hayes-ub4/car-audio-security-code/311088168

lots of ways, to leak rain (or other things) windshield glass cracked door seals bad or door warped heater core, leaking engine coolant, (not water AF50% coolant) the water in hand feels slimy, is not rain.!! the cars most have cowl vent area in front of windshield glass. this cowl when opened UP we see drains if the 2 or more drains Are clogged up with leaves or nests. the cowl floods like a bath tub and overflows the HVAC fresh air vent, port, (a coffer dam it is) and flows to the hVAC blower and to the floor., bidda bodda boom. or super bad rusted car bodies sure do leak. never ask the blind we can not see your car, blind find shop tech to find it , living hands on work.

Check to make sure the breather/air filter box is sealed. You have some really bad air inlet leakage.

30nm 90’ + 90’