1992 Daihatsu Rocky - Page 3 - Answered Questions & Fixed issues


you need to remove the valve cover and if they are even adjustable there will be locknuts on a stud on one side you need feeler gauges and adjust by loosenin the nut with cylinder in compression sequence tightrn stud with screw driver or allen wrench whichever applies put feeler guage probably.018 between rocker and vale tightrn untilfeeler gauges move with some resistance lock nut tight but be sure you can still move feeler gauge get all cylnders then reinstall valve cover

1992 Daihatsu... | Answered on Jul 21, 2009 | 511 views


the sender unit is attached to the fuel pump in the tank.
it can be repaired but it is costly.the other option is to remove the cluster and make sure that the indicator needle is free to move and is not hanging up from a weak return spring or a warped cluster plate

1992 Daihatsu... | Answered on May 23, 2009 | 220 views


try taking the main power to the alarm off then hook the battery back up and then reconnect the power supply to the alarm! hopefully it works

1992 Daihatsu... | Answered on Apr 17, 2009 | 332 views


you can order it on line or go to auto zone - advance auto or oreillys .

1992 Daihatsu... | Answered on Apr 08, 2009 | 97 views


Unless your rocky was custom or rebuild, the four wheel drive on the 90-92 rocky is not auto engage. it is manual. you have to use the four wheel gear shifter located left of the main gear shifter.

1992 Daihatsu... | Answered on Feb 19, 2009 | 457 views


Try this spot. They are great. http://www.autopartswarehouse.com :)

1992 Daihatsu... | Answered on Jan 04, 2009 | 64 views


You are probably better off taking it to an authorized dealer. This job require some specian tools and you would also have a warranty with the work.

1992 Daihatsu... | Answered on Nov 25, 2008 | 1,146 views


try checking ebay

1992 Daihatsu... | Answered on Nov 12, 2008 | 308 views


check the o2 and map sensors

1992 Daihatsu... | Answered on Feb 19, 2009 | 625 views


hi, yes the clucth kit will contain the clutch and the pressure plate that holds the clutch onto the fly wheel and the kit also contains the thrust bearing. so the clutch kit will contain all you need.

One thing to make sure you do is clean the pressure plate as the metal surface that touches the clutch will have an oily liquid on it to prevent it from rusting when its on the shelf so clean this with a brake cleaner or other alcohol based cleaner as the plate needs to be free from grease and perfectly clean.

Hope this is some help to you any problems or questions just give me a shout back ok

1992 Daihatsu... | Answered on Feb 14, 2009 | 185 views


Won't get it to start with this key no computer chip.

Daihatsu Rocky... | Answered on Nov 22, 2017 | 91 views


you need to find one in a local junk yard, or try ebay.

Daihatsu Rocky... | Answered on Nov 23, 2016 | 30 views


Search Results

    F77 2.8 diesel non turbo.1989 model.require head bolt - Fixya

    www.fixya.com/cars/t25792470-f77_2_8_diesel_non_turbo_1989
    Jul 22, 2015 - f77 2.8 diesel non turbo.1989 model.require head bolt tensions,stages and sequence please - Daihatsu Rocky question. ... Torque to yeild bolts need to be replaced whenever the head comes off.....Long bolts are 46 ft lbs. and ...

Daihatsu Rocky... | Answered on Nov 17, 2015 | 300 views


www.youtube.com/watch?v=HFP4blveiLI

If you need further help, reach me via phone at https://www.6ya.com/expert/cynthia_0eebb7da17b33b5e

Daihatsu Rocky... | Answered on Oct 17, 2015 | 57 views


You need a wheel puller to remove after the retaining nut is removed. They are on a splined shaft and can be quite tight in there fit.

Daihatsu Rocky... | Answered on Mar 08, 2015 | 49 views


need-full-diagram-all-vacuum-hose-4zd3bd5gq3al5u3rwzqu2kzd-2-0.jpg There you go

need-full-diagram-all-vacuum-hose-4zd3bd5gq3al5u3rwzqu2kzd-2-2.jpg


need-full-diagram-all-vacuum-hose-4zd3bd5gq3al5u3rwzqu2kzd-2-3.jpg


need-full-diagram-all-vacuum-hose-4zd3bd5gq3al5u3rwzqu2kzd-2-4.jpg


need-full-diagram-all-vacuum-hose-4zd3bd5gq3al5u3rwzqu2kzd-2-4.jpg

Daihatsu Rocky... | Answered on Oct 24, 2014 | 2,081 views


Prob on a tank on the radiator if not around your thermostat housing

Daihatsu Rocky... | Answered on Jul 01, 2014 | 26 views


3265:4376::4673:?

Daihatsu Rocky... | Answered on Feb 15, 2014 | 380 views


are you sure the pump has a timing adjustment on it? I have never heard of such a thing. Sounds like the timing description is for the distributor adjustment for timing.

Daihatsu Rocky... | Answered on Dec 10, 2013 | 68 views


Check for a vacuum leak around the intake or broken vacuum lines around the engine

Daihatsu Rocky... | Answered on Jul 30, 2013 | 329 views

Not finding what you are looking for?
1992 Daihatsu Rocky Logo

118 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1990 Daihatsu Rocky
1990 Daihatsu Rocky

87 Questions

1991 Daihatsu Rocky
1991 Daihatsu Rocky

38 Questions

1993 Daihatsu Rocky
1993 Daihatsu Rocky

2 Questions

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Daihatsu Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...