2000 Daewoo Korando - Answered Questions & Fixed issues
No low beam
There should be relay under the hood in the fuse box, replace it.
11/23/2013 12:31:40 AM •
2000 Daewoo...
•
Answered
on Nov 23, 2013
•
69 views
Mil light on
needs a diagnostic plug in to get a trouble code to trace the cause of the fault
11/23/2013 12:31:05 AM •
2000 Daewoo...
•
Answered
on Nov 23, 2013
•
109 views
I own a 1998 turbo diesel it was parked for a year
This car has an oil-clutch fan that works faster with higher temperature. If the fan clutch is broken or has lost oil it may be not working at the speed required. I am sorry I do not know how to repair it. The manual recommends, once out of its axle, never to place the fan but in upright position (as in the car) to preserve the oil inside.
11/6/2013 10:40:59 PM •
2000 Daewoo...
•
Answered
on Nov 06, 2013
•
87 views
Musso
Have the fault codes read. Replace faulty items. Use only genuine items as non-genuine replacement are not always compatible with the OEM fitted CPU units. There may be a fault in the connectors to the injectors.
6/22/2013 9:46:38 AM •
2000 Daewoo...
•
Answered
on Jun 22, 2013
•
108 views
I have a ssang yong musso 2.9ltr tdi..... it
unfortunetly the presure place is bad on the cluck their prob a differance of about 5" on the cluch peddal higher than the brake. need to replace it befor you get stranded. if it goes completly out you will not be driveing that car
8/6/2011 6:49:38 AM •
2000 Daewoo...
•
Answered
on Aug 06, 2011
•
190 views
How to open the bonnet of a Daewoo Matiz SE
Loo between both light in the long **** shape gap just below where the bonnet is. If you look to the right, you should see a black cable hanging down. If not the it has snapped away, but if you can. Here is what you can to to open the bonnet. Use a long pair of plires and gab the cable. When you have a good grip, pull the cable firmly to the right (passenger side light). This should open the bonnet. It has worked for me....
Hope this helps
5/31/2011 9:38:37 AM •
2000 Daewoo...
•
Answered
on May 31, 2011
•
2,711 views
How do i set the
diesel pump has a locking pin on the side which you need a tool for. once the pump is locked can you only then set your cam timing
3/28/2011 4:48:32 PM •
2000 Daewoo...
•
Answered
on Mar 28, 2011
•
314 views
Not finding what you are looking for?