20 Most Recent Hyundai Motor 2004 Accent Questions & Answers


It can be broken baring wheel on waterpump,you can change pupm, belts tensioners. Or it can be hidro valve- which engine oil do you use. Use not 5w30-its too thin ,better use 5w40 or 10w40. Zoran Vrgec, Osijek, Croatia

Hyundai Motor... | Answered on Jun 11, 2020


What are the fault codes you have? Is the check engine light blinking while driving?

Hyundai Motor... | Answered on Dec 29, 2019


Throttle position sensor could be the problem
Emmission control parts
You mentioned idler cable
Well there may be a second idler control cable
Some vehicles come with a double cable adjustment
The second adjustment is right above the gas pedal
Turning screw
Alternator giving out not producing charge needed
But overall if your cars idle bogs down the likely culprit is your ac bout to go out
The bearings in compressor wear out so it pulls more on the engine
In turn bringing rpm's down
Your car needs routine maintenance
Ac is an expensive repair so i suggest bypass belt till you can pay to have it fixed

Hyundai Motor... | Answered on Dec 01, 2019


ive got a 1994 1.3 accent and now its spluttering was does it mean ?

Hyundai Motor... | Answered on Feb 27, 2018


If it's manual transmission then bump start it.
You may find that simply putting it in gear and pushing it a little will wake the starter up.

Hyundai Motor... | Answered on Oct 21, 2017


Now you have to start the wiring from the motherboard to have the wiring run correct. Easy fix. Junkyard should have a light for your car.

Hyundai Motor... | Answered on Oct 07, 2017


if it has one, the timing belt should be done, along with a tune up. spark plugs air filter, fuel filter. etc

Hyundai Motor... | Answered on Jun 18, 2017


take it to auto zone and have the fault codes read for free
come back with the revealed faults

Hyundai Motor... | Answered on May 25, 2017


Starter motor.

Hyundai Motor... | Answered on Apr 15, 2017


That sounds like a timing/ cooling system issue. The coolant sensor would adjust the timing etc. Your tech would have to scan the car & check the live readings (HOT & COLD) & check the emissions. Put all the pieces together & solve the puzzle

Hyundai Motor... | Answered on Mar 11, 2017


Does the motor crank (starter engaged and turning the motor)? If it does not crank, do you hear the solenoid clicking (engaging the starter gear into the flywheel teeth)?

Hyundai Motor... | Answered on Dec 04, 2016


Open the glove compartment, unlock the latches and replace the filter

Hyundai Motor... | Answered on Jul 02, 2016

Not finding what you are looking for?
Hyundai Motor 2004 Accent Logo

Popular Tags

350 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Hyundai Accent
2000 Hyundai Accent

1,132 Questions

2001 Hyundai Accent
2001 Hyundai Accent

1,080 Questions

2002 Hyundai Accent
2002 Hyundai Accent

1,050 Questions

1999 Hyundai Accent
1999 Hyundai Accent

518 Questions

2003 Hyundai Accent
2003 Hyundai Accent

499 Questions

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Accent Hyundai

  • Accent Hyundai

Most Popular Question

cause popping when turn off car keep

  • Cars & Trucks
Loading...