20 Most Recent
1994 Land Rover Discovery - Page 11 Questions & Answers
Noise when accelerating
a drive belt may be loose or going bad! you can buy a can of belt dressing at any auto parts store. just spray on drive side of pulleys while running. if belt is slipping on pulley, it will calm down. but if it does not stop making noise, replace belt or tighten it. be very carefull when car is running. good-day!
Low beam headlight stays on permantly
Could be that the low beam relay is stuck. If you can locate the relay usually in a fuse box in engine compartment ,remove it and see if lights go out.
Car cuts out when slow down
Check for vacuum leak,if its not.chk the MAF sensor.u might need a scanner to read to confirm the reading.vacuum leak is no 1.check any crack on hoses,pipe,gaskets
Firing order landrover v8 engine 3.9l
Jeffery is exactly opposite to the facts. The cylinders are numbered standing in front of the engine left bank front cylinder ( the cylinder nearest to the front first 2 4 6 8
right bank front cylinder first 1 3 5 7
source Land Rover Discovery 1 manual section 86 electrical page6
Not finding what you are looking for?