20 Most Recent
1994 Kia Sephia Questions & Answers
Will not start
code p1800 refers to engine torque signal ---malfunction===causes--wiring ---TCM (transmission control module).
replace the TCM
Cant find tranny fluid fill up on 94 kia sephia
To fill a 94 Kia sephia 5speed tranny you need to take the spedo gear out the big black plastic part sticking out of the top of the tranny close to the firerwall by the bell housing unscrews after you unplug it then you'll need a 10 mm socket and ratchet there's a rubber o ring that will give you a little resistance then you get a funnel and 80w-90 gear oil and your set.
Rear brake not working thow the brake fluied is
then you need to find someone who knows how to bleed brakes, have him bleed it and tighten the bleeder when he is done. bleeders do not just loosen themselves however, generally they are more than a little tight. so you may want to pay someone to pull the wheel off and inspect the slave cylinder or caliper to make sure that no other leak exists.
Check engine light on panel is lit.
When the Check Engine light is turned on the computer control unit (called the PCM) has sensed a fault in the electronic controls of the engine and/or the emission system. When this happens you will seldom feel the car engine run any different. There are about 200 possible faults that turn the Check Engine light on, to know what has developed a problem you must have the system tested, this is called an OBD2 fault code test, Kragen and Autozone parts stores do this testing for free.
Not finding what you are looking for?