20 Most Recent 2004 Infiniti G35 Sport Coupe - Page 7 Questions & Answers

check fuses , check for power in wiring harnes under the seat . if power is there replace motor in set !

it is common where are you located ill do it for 175 im in new jersey

first you will need a multi meter it checks for volts, ohms which is resistance,and amps which is current,some have a beeper that goes off when you get a good curcuit now first check the switch on the door the one used the most which is the driver side door switch first remove all screws hopefully they are all phillips if not get the correct screw tip for the correct screw head and remove all the screws under and around the switch lightly tug on the switch it should move as if it wants to come out if it is still tight look for hidden screws never force anything sometimes a small flat-head screwdriver to push back plastic locking mechanisms is needed once you get the switch out it will have several wires running off of it turn the switch over with a black sharpy make a dot (where it can't be seen when the switch is installed) at one end of the switch Now draw a diagram of the wires coming out of the switch using the black dot as a reference point if you have several wires of the same color draw on the metal connector with your sharpy one line for your first black wire two lines for your second black wire etc. now that you have all of your wires removed each switch has open and closed curcuits set the multi meter on ohms touch the leads together and the display will change radialy this is a good curcuit or if you have the beeper use it by touching the leads together the meter beeps this is very handy put your red and black leads on one switch and flip the switch if it beeps the switch works check all of the switches on the multi switch panel you removed from your driver side door if any of them do not beep get a new switch from the infiniti dealer or at a on line parts store this is cheaper If they all work buy the infiniti manual at any auto parts store Next check the motor of your windows the wiring diagram in the back of the manual will have the correct voltages get a trim remover and remove the interior driver side door panel and the insulation carefully try not to rip it to much Infiniti's use the same unfortunatlly cheap made in china electronic parts as a less expensive brand cars same with the window motors, if one switch works put the motor wires on this working switch and see if the motor works if it does great, replace all the motors that are burned out and any of the switches that are also burned out also work slowly sometimes removing interior trim the plastic plugs brake pick up a few at your auto parts store and replace the broken ones .good luck

Had the same problem with my g35x. Chech to see if any of you light work .markers in front and side if they don't it maybe you head light switch . If you see the maker light on there There is a led cluster light that is the main light for you tail light check to see if you have power going to that . If you do have power there it's just bad and the hole tail light needs to be replaced it sucks but there is no other fix it's built into the tail light lens and you have to replace it I tried everything that fixed it

look for a loose hose between the air filter and the intake

a new engine will be your best result due to lack of engine oil

check that the switch is still in auto and not in the off position

might be the alternater belt needs to be tighten

I found the best (quick-cheap) solution for an inoperable power seat that you know the fuse is not blown on was to use Contact/Control Cleaner & Lubricant that you can find a radio shack. I moved the switches up and back enough to get the end of the nozzle straw between the gaps and worked it back and forth. As soon as I started to work the switch back and forth, the cleaner must have begun to eat away at the previous owners spilled, thick coffee residue and the seat began to move. This worked better than the rubbing alcohol I tried originally. --Great stuff!