Top 20 1996 Saab 900 Questions & Answers

hi Donna. go to this link might help you find out. how to change fuel pump on 1996 SAAB 900s Google Search

He is probably referring to the fluid level in the transmission - filler tube with a check rod attached to the cap is under the hood. These Japanese transmissions have many problems as they get older, so you could be looking at replacing it.

Check for sparks. Do It Yourself Diagnosis and Repair

Check that the fuse is OK.

Saab 900 1994 1998 Factory Workshop Service repair manual I hope your problem will be solved :))

You could have bad speed sensor,ABS sensor could be bad or broken wire,I fix mine broken wire.

Sounds like timeing out

If the water pump was replaced, was the thermostat changed as well? If so, it could be that the system is 'settling in' and just needs to be topped off with antifreeze for the next few days. Sometimes when it's put under pressure to fill, it doesn't fill ALL the way and requires a little manual topping off.

Tech2 is the only help..

you will also need to check the wires coming off both o2 sensors and also sometimes the main CPU gets fried always sending those codes

turbo?check all the tubing for the intake,turbo and air mass meter

Hi Jeff, I'm glad to help! Jeff, what we find all the time at the dealership mostly is the spray nozzles are stopped up. But on the other hand if you do not hear the pump motor running, then check power and ground. If you have both the replace the pump motor. Hope this helps and have an awesome day Jeff.

Hi Johnny, check... battery terminals for loose connection. ??????? regards, nuwan

replace the fan thermoswitches and, or, relays

Replace the battery on the FOB

could be the anti-theft device in the radio. it requires you to put the 4 digit code in to "unlock" the radio for use. This number should have been given to you by the seller -otherwise can be obtained by a previous SAAB dealer. This can happen when the battery is disconnected for a period of time

Did you check the oil level.

have a place like checker or autozone check your battery for the proper AMP output

unhook the battery for an hour or so to fully clear any previously bad entry attempts. hook battery back up and try the code again

usually starting fluid only works with carburated engines not fuel injection.