20 Most Recent 2006 Isuzu Ascender - Page 6 Questions & Answers

0helpful
1answer

Check engine code P0449 for 2006 Isuzu Ascender

It means the computer can not vent the fumes from the gas tank to meet emission standards.Depending on the actual problem, the fumes could be venting all the time, or not at all.
7/1/2012 4:39:56 PM • Isuzu Ascender... • Answered on Jul 01, 2012
0helpful
1answer

Fuel pump not working after being replaced and the relay has been replaced

Check for ground, check for power, check fuse and check relay, all can be done with an ohms meter.
6/12/2012 11:12:44 PM • Isuzu Ascender... • Answered on Jun 12, 2012
0helpful
1answer

How do you prime the fuel pump on a 2006 isuzu ascender

If your car is petrol it should self prime when you switch the car on.If your car is diesel there should be a manual primer to pump pressure into the injectors and remove any air in the fuel lines. you will need to pump this until you feel the pump get hard to push which means there is fuel there. you may need to do this a few times to remove all the air from the lines. Hope this helps.
6/12/2012 3:18:56 PM • Isuzu Ascender... • Answered on Jun 12, 2012
0answers
0helpful
1answer

The gas light came on

The float in the tank might be leaking and since it has gas in it, its showing empty.
9/17/2011 3:10:17 AM • Isuzu Ascender... • Answered on Sep 17, 2011
0helpful
1answer

My power steering box is

You can just replace the seal to control the leak. Else if necessary you can find Isuzu power steering box at http://www.carsteering.com/isuzu_steering.htm
8/9/2011 11:04:18 AM • Isuzu Ascender... • Answered on Aug 09, 2011
0helpful
1answer

Someone told me to change

I have never in the 35 years working on car heard that one, the oil is either leaking or running thru the engine out the exhaust, pull the spark plugs to inspect them for oil on the tip that is in the engine, get back to me and i'll help you.
8/5/2011 8:31:58 PM • Isuzu Ascender... • Answered on Aug 05, 2011
0helpful
1answer

How do you get the

should be flanged at both ends so you can remove bolts and swap it out. if not you will have to cut pipe and weld new converter in place
7/27/2011 12:13:49 AM • Isuzu Ascender... • Answered on Jul 27, 2011
0answers
0answers
Not finding what you are looking for?

137 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ascender Isuzu

  • Ascender Isuzu

Most Popular Question

s factory amp located in 2006 isuzu

  • Cars & Trucks
Loading...