20 Most Recent 1997 Lexus ES 300 Questions & Answers

check the flywheel sensor, on the belt end of the engine,on the engine block,easy th change over ,that is a good possibility. good luck!

1997 Lexus ES... | Answered on Oct 26, 2019

Hi. Thanks for your question. For assistance on fuel filter of 1997 lexus es300 you can visit https://www.reliable-store.com and download the entire workshop manual which includes all the information along with the diagrams for better understanding. Good day!

1997 Lexus ES... | Answered on Mar 23, 2018

I know a website that has every info on all vehicles and vehicle problems(common/basic and technical both), with their solution In detail.. it's www.reliable-store.com

1997 Lexus ES... | Answered on Mar 09, 2018

If your car has the original wheels they were P205/65-R15.

1997 Lexus ES... | Answered on Oct 18, 2017

There is a main fuse in the fuse box that feeds all the accessories. Read this forum: http://us.lexusownersclub.com/forums/topic/22406-fusible-links/

1997 Lexus ES... | Answered on Jul 29, 2017

On this website you find fuse box diagram and description for Lexus ES300 (1997)

Lexus ES300 1997 fuse box diagram Auto Genius

1997 Lexus ES... | Answered on Jul 12, 2017

On this website, you find fuse box diagram and description for Lexus ES300 (1997)

Lexus ES300 1997 fuse box diagram Auto Genius

1997 Lexus ES... | Answered on Jul 01, 2017

Try cleaning and tightening well the battery connections along with the battery wires to the solenoid and starter motor.

Bad connections and low voltage of 12 volts can result in this anomaly.

1997 Lexus ES... | Answered on Jun 12, 2017

There are a number of oil filter removal tools designed for various applications. A knowledgeable Auto Zone representative should be able to help you select the correct one.

1997 Lexus ES... | Answered on May 07, 2017

google the codes you have posted here
codes P0303 and P0302 lexus 300
these are cylinder misfire codes. There is a procedure for this but I would suggest you rad that and follow directions before going the compression test route. The other thing you said was that all this started when you ran out of fuel. Could be you burned out the fuel pump or the pump sucked the junk up off the bottom of the tank and is now plugged up. So many choices but if it was me, I would start with the fuel pump before I started tearing into the motor.

Hope this helps.

1997 Lexus ES... | Answered on Jun 06, 2016

. Find the RED / GREEN (-) wire located in the "25 PIN" Plug at the Driver Kick Panel / Door Harness.
Ground the RED / GREEN (-) wire.
This will DisArm the Factory Alarm until the Ground is removed.
You can try (does not always work):
Be sure battery is fully charged
Disconnect Negative Battery Cable
Open Driver Door & LEAVE Open
Turn Ignition Switch ON & LEAVE On
Reconnect Negative Battery Cable
Alarm may sound for a few seconds
Start vehicle

I’m happy to help further over the phone at https://www.6ya.com/expert/dennis_7c5f8bf265aab5e9

1997 Lexus ES... | Answered on Apr 26, 2016

A bad running vehical can cause static I changed my distributor

1997 Lexus ES... | Answered on Dec 02, 2015

Not finding what you are looking for?
1997 Lexus ES 300 Logo

402 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Lexus ES 300
1999 Lexus ES 300

355 Questions

1996 Lexus ES 300
1996 Lexus ES 300

293 Questions

1995 Lexus ES 300
1995 Lexus ES 300

275 Questions

2000 Lexus ES 300
2000 Lexus ES 300

217 Questions

2003 Lexus ES 300
2003 Lexus ES 300

-121 Questions

Top Lexus Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

ES 300 Lexus

  • ES 300 Lexus

Most Popular Question

car ran out gas few days later when fuel

  • Cars & Trucks