20 Most Recent 1990 Honda Prelude Questions & Answers

0helpful
1answer

Honda prelude grinding noise when braking

Better inspect them again. If you have grinding noise when braking. It's only one thing the brake pads are rubbing on the rotors. Now the question is which front wheel. Remove the brakes and inspect the caliper see if it's not sticking and the sliders. Then inspect the pads and the rotor for a ridge that can cause noise when the pad rubs the ridge. Just looking at the wheel won't be enough you have to remove the parts to find the problem
2/1/2018 6:12:53 PM • 1990 Honda... • Answered on Feb 01, 2018
0helpful
1answer

93 prelude si transmission trouble

As the commenter said, check if the tranny fluid is full. A clear pink or red is best, a dirty brown or cloudy color is probably trouble. It's a '93- it is 24 years old, everything wears out eventually. I'm as old as the hills myself, and I can't run anymore. Start looking for a replacement transmission, or have a transmission shop diagnose it. Unless you are attached to the car, don't let them talk you into a new transmission-the cost may be more than the car is worth. You might want a used unit- try to get ANY kind of warranty-even 30 days is better than nothing. If it lasts beyond 30 days without a problem, it might go another 24 years---pshaw! not really.
6/9/2017 1:10:38 AM • 1990 Honda... • Answered on Jun 09, 2017
0helpful
1answer

The drivers side seat belt on my 90 Honda prelude will not retract at all

Damaged retractor on some vehicles when the seatbelt retractor gets damaged. Either by getting in a crash or in some cases a hard stop when the belt is worn by someone it will not retract
4/20/2015 1:11:27 AM • 1990 Honda... • Answered on Apr 20, 2015
0helpful
2answers

I have a 1990 honda prelude 4ws it won't start

it is carburetored sounds to be the choke on it
4/5/2015 4:23:11 PM • 1990 Honda... • Answered on Apr 05, 2015
0helpful
1answer

What lbs do I tighten the head bolts to on my 1990 Honda prelude SI 2.1L DOHC and in what order do I tighten them?

Go inside the local Autozone and ask for the cylinder head torque specs. They will look it up and print it out for you. It will contain the torque specifications as well as the sequences. Happy torquing.
3/1/2015 12:28:16 PM • 1990 Honda... • Answered on Mar 01, 2015
0helpful
1answer

How to change driving light bulb on a 1990 honda prelude

What is a driving light bulb ?
1/25/2015 11:34:02 PM • 1990 Honda... • Answered on Jan 25, 2015
0helpful
1answer

Seat belt

if it wont undo from the buckle you will have to unbolt the belt at its anchor points and take to a garage to see if the buckle can be repaired or just put a new one in
7/8/2014 11:06:18 PM • 1990 Honda... • Answered on Jul 08, 2014
0helpful
1answer

Cooling fan loose

Hi Sandy, it is hard to do by yourself and major problem is reaching that area is not much easy.and sometime the fan pinion is loosen by itself and sometime motor shaft key lost or it can be loosen nut. but you must see the mechanic , its good idea. regards. nuwan
1/10/2014 5:16:35 AM • 1990 Honda... • Answered on Jan 10, 2014
0helpful
1answer

Error code 7,41,and 43. Is it just the TPS?

still busted? can help
12/29/2013 5:44:36 PM • 1990 Honda... • Answered on Dec 29, 2013
0helpful
1answer

I have a 91 prelude (manual transmission). It

coil , rotor, cap, wires and spark plugs if that does not help you than your clutch needs to be replaced !!
11/21/2013 11:08:23 PM • 1990 Honda... • Answered on Nov 21, 2013
0helpful
1answer

Battery light staying on and loses power going up

How long has this been happening? Your battery light stays on when you have a charging problem.
9/11/2013 8:25:32 AM • 1990 Honda... • Answered on Sep 11, 2013
0answers
0helpful
1answer

92 honda prelude no compression

if is a H22a4 or h22 motor, u need to get the timing marks lined up then put the belt on, make shure it is a h22 bent and not a F22 SOHC belt
2/12/2013 10:44:33 PM • 1990 Honda... • Answered on Feb 12, 2013
0helpful
1answer

How do you get to the speed sensor on a 1990 honda

I had to take my whole breather assembly out to reach it. Once out it will be on top of your transaxle but its still a little tough to get to because of the hoses on top of it. It took about 2 hours to replace.
2/10/2013 4:18:42 AM • 1990 Honda... • Answered on Feb 10, 2013
Not finding what you are looking for?
1990 Honda Prelude Logo

174 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6928 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14942 Answers

Pierre Laplante

Level 3 Expert

2061 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Prelude Honda

  • Prelude Honda

Most Popular Question

drivers side seat belt 90 honda prelude

  • Cars & Trucks
Loading...