20 Most Recent 2001 Hyundai XG300 Questions & Answers


Here is the fuse arrangement...you can see there are usually some spares if they are there.
06fe106.gif

49834c0.gif

This should answer your question.
If it helps please rate my answers.
You can do it.
Brett

2001 Hyundai... | Answered on Dec 20, 2018


need to have shop or auto parts do a fault scan to determine what failed. Could be simple glitch but don't put it off, if there's a problem "they don't fix themselves"

2001 Hyundai... | Answered on Oct 25, 2018


If the starter cranks the engine at normal cranking speed, it's not a starter problem. So you have to check for fuel and spark.

2001 Hyundai... | Answered on Mar 16, 2018


A noise like you are describing is not related to the rack and pinion steering. It is related to a cv joint. If you can find a parking lot that has no cars in it. turn in a tight circle to the right and listen then do the same to the left. You will hear the noise and can tell which one it is coming from.

2001 Hyundai... | Answered on Oct 21, 2017


Those lights rarely burn out. More likely the switch on the brake handle came unplugged. Try grounding the wire from the ebarke switch with the key on.


0996b43f8024e4ce-lxsvs4ftyjtcqsaualeaxmu4-5-0.gif
For the mirrors, I would pull up the control panel and probe for power. Trace the power through the mirror sekection switch, etc.


0996b43f8024ee04-lxsvs4ftyjtcqsaualeaxmu4-5-2.gif

2001 Hyundai... | Answered on Aug 30, 2017


First never attempt to clean or touch the element of a Mass Airflow sensor, it will damage it. A dirty air filter can put MAF sensor out of range. Change the air filter. The popping during acceleration is an indication of fuel starvation. Change the fuel filter. Do the OBDII scan again and delete the stored fault history so that anything else that comes up will be current. Use the current fault history as a guide to any further repairs to avoid buying parts you don't need

2001 Hyundai... | Answered on Jun 07, 2017


you need to connect a diagnostic machine to your obd socket, you can actuate the tps through the machine, it will also give you the correct location of wires/connectors.

2001 Hyundai... | Answered on Apr 25, 2017


The 350 code is a circuit problem with the coils and the variable valve gears being stripped can be a definite driveability issue .

2001 Hyundai... | Answered on Apr 11, 2017


crank sensor is located on the front of the engine behind the
timing belt covers and is mounted to the front of the engine block. the alternator has to be moved to feed the harness down the front side of the block to replace the crank sensor it has a tone wheel that may have to be moved the remove and replace sensor

2001 Hyundai... | Answered on Mar 26, 2017


this is the difinition from the Hyundai manual

P1191 ETS Limp Home Valve On
P1193 ETS Limp Home - Low Rpm
You have a problem with the throttle sensor.

2001 Hyundai... | Answered on Feb 24, 2017

Not finding what you are looking for?
2001 Hyundai XG300 Logo

704 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

XG300 Hyundai

  • XG300 Hyundai

Most Popular Question

2001 hyurdai xg300 replace crankshaft

  • Cars & Trucks
Loading...