20 Most Recent
1988 Honda Prelude Questions & Answers
88 Honda prelude SI wont start?
U need to re-timed the engine. Check all four marks going across the two cam pully is lined up with the engine head surface.
Then check the crank pully alignment mark the single notche align to the mark on the timing cover
My honda prelude 88 won't
DOES IT CRANK OVER/IF NO CLEAN YOUR BATTERY CABLES AND CHARGE OR REPLACE YOUR BATTERY.IF STILL NOT STARTING PULL ONE SPARK PLUG OUT AND CHECK FOR SPARK.THEN CHECK FOR FUEL/
1988 prelude p side headightl mechenizime slopy when fully open
Oops anyhow i just posted the same question .our problem starts by putting the hood holder rod next to the headlight instead of next to the battery when we close our hood then our next problem is we turn our lights on well the hood holder rod gets in a bind when it tries to open .soo the short of it is that it gets bent so no guarantee adjusting it will work .that being said this process should work perfect on the drivers side .for the passengers side it just depends how many times it was put on the wrong side and tried to turn on the lights and how badly the mechanism was bent!!!!!!!
3s light is flashing
double posted and again not a clue as to exaclty where you see this.
pretend we are blind. really.
3s light flashing
3s, humm...... what is that, google shows ZERO for that.
can i know what object shows that? dash, ECU, trans shift.? what?
where are your eyes looking,?
is this the ECU flash code>? LED? at ECU?
"1985-91 Prelude models, there is only one LED display."
ECU code 3 is bad MAP (or bad vacuum to it)
Carb engine or EFI engine./ and which engine?> "options"
here is the FSM , look it up , gen 2 to 5
http://hondatech.info/downloads/Auto/Manuals/Prelude/
Turn signal & hazard light switch
does all else work? car run and drive and head lamps work at same time, yes,then you blew the turn/haz fuse in the fuse box.
the operators guide answsers were those are. read it.
Not finding what you are looking for?