20 Most Recent
Questions & Answers
The third row seat is stuck in the collapsed
I had to take it to the dealer to get it 'unstuck' and they ended up bending the frame of the backseat! If you can get into the spot where it locks into the trunk frame you can unlock it yourself, but you need a second person to hold the seat back form the trunk frame so you can POSSIBLY squeeze your hand or a tool in there to do it. Its VERY DIFFICULT! Hope that made sense...lol
The "Lamp Light" on my 2001 Honda Odyssey came on.
At the rear of the brake lights, one of them, the driver ' s side, there is a "chip" that check the lightbulbs, so this could have gone back and you can by-pass the bad wire. You have to take out the brake light assembly to see it.
I have a 1995 Honda
Check if the compressor is working.
looks like there is a problem with compressor , hence working intermittently.
Remove and replace lug bolts on my 2001odysey
Jason, im guessing you old ones are either broken or stripped. It will really depend on how long the bolts are.
You can take a punch and hammer, drive out the old ones. If the new ones aren't to long you can slip the new ones in from the back of the hub.
If you are able to slip them in, you can place one of the lug nuts on the stud ( backwards) and proceed to tighten the lug nut until the new bolt completely seats against the hub.
The reason you place the lug nuts backwards is so you don't damage the chamfer,tapered end of the lug nut.
Get back to me if you have any other questions, Robert
What do code 31-02 mean for my 2001 handa odossey
The OBD code P3102 means there is a "transmission control ECU malfunction".
You may be experiencing a hard shudder when you turn off the engine.
Possible causes could include: Faulty fuse or fuses, faulty wiring and/or Connector(s) from/to Intake Manifold Flap Motor or a faulty Intake Manifold Flap Motor.
Your possible solutions could include: Check for blown fuses, check wiring and/or connector(s) to and from the Intake Manifold Flap Motor, check or replace the Intake Manifold Flap Motor. You can also perform an Output Test.
Not finding what you are looking for?